Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Open-frame triple-output power supply unit, green PCB with soldered components

Mean Well

Mean Well PT-65A 60W Triple Output Power Supply 5V 12V -5V

SKU CH-W7VZ-1GVNP

Delivers 60 W across three rails at 5 V, 12 V and -5 V for industrial open-frame builds

  • TypeAT
  • Triple-output design delivers 5 V, 12 V and –5 V from one unit
  • 60 W total power handles demanding industrial loads
  • Channel 1 supplies 5.5 A at 5 V for logic circuits
  • Channel 2 provides 2.5 A at 12 V for motors or relays
  • Channel 3 offers 0.5 A at –5 V for analogue biasing

Industrial triple-output supply

The Mean Well PT-65A is an open-frame AC-DC unit built to the AT form factor. It delivers three regulated rails from a single 60 W budget, making it suited to legacy industrial gear and test benches that still expect a 5 V, 12 V and -5 V combination.

5.5 A on 5 V, 2.5 A on 12 V, 0.5 A on -5 V

The 5 V rail carries the bulk of the load at 5.5 A while the 12 V rail supports fans or drive motors at 2.5 A. The -5 V rail is limited to 0.5 A, so it only suits low-current bias or reference circuits. Combined draw must stay within the 60 W envelope.

AT form factor constraints

Mechanical mounting follows the classic AT footprint, so it fits existing chassis cut-outs without adapters. The design omits power-factor correction, which keeps cost down but means the unit draws non-sinusoidal current from the mains. No remote-sense or parallel-operation features are provided.

Pluspunten

  • Triple-output design delivers 5 V, 12 V and –5 V from one unit
  • 60 W total power handles demanding industrial loads
  • Channel 1 supplies 5.5 A at 5 V for logic circuits
  • Channel 2 provides 2.5 A at 12 V for motors or relays
  • Channel 3 offers 0.5 A at –5 V for analogue biasing

Specificaties

TypeAT

Vragen over dit artikel

Will the 5 V rail at 5.5 A and 12 V rail at 2.5 A run legacy ISA cards and a vintage motherboard together?

The PT-65A delivers 5 V at 5.5 A, 12 V at 2.5 A and –5 V at 0.5 A simultaneously, matching typical AT-era load splits for ISA slots and motherboard logic.

How can I confirm all three outputs are live after wiring the open-frame unit?

Measure 5 V on CH1, 12 V on CH2 and –5 V on CH3 with a multimeter under load; each rail should stay within ±5 % of its rated voltage.

Does the box include mounting hardware or only the PT-65A board?

The package contains the PT-65A open-frame supply plus a free gift; screws, standoffs or a chassis are not included and must be sourced separately.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.