Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with black memory chips and gold edge connectors

Micron Technology, Inc.

Micron Technology, Inc. MTC10F1084S1RC48BA1 16GB DDR5-4800 RDIMM server RAM

SKU CH-QEXJ-2Q3FN MPN MTC10F1084S1RC48BA1

16 GB DDR5-4800 RDIMM with ECC and registered signal processing for servers

  • ECC protection prevents data corruption in critical workloads
  • Registered signal processing improves stability on multi-module servers
  • DDR5-4800 speed delivers 4800 MHz bandwidth for demanding applications
  • 16 GB capacity supports larger datasets per module
  • CL40 latency balances timing with high-frequency operation

Micron 16GB DDR5-4800 RDIMM Server Memory

This Micron MTC10F1084S1RC48BA1 module delivers 16 GB of DDR5 SDRAM at 4800 MHz. It operates as a PC5-38400 registered DIMM with ECC and a CAS latency of CL40. The single-rank 1Rx8 organisation suits workstation and server motherboards that require registered, error-correcting memory.

Suited for registered ECC platforms only

Systems that need registered signal processing and on-die ECC will use this module correctly. Builders with consumer boards that accept only unbuffered non-ECC memory should look elsewhere, as those platforms cannot support the registered interface or the error-correction features this DIMM provides.

PC5-38400 speed rating defines compatibility

The DDR5-4800 standard, labelled PC5-38400, is the single specification that decides whether this part matches the motherboard and CPU memory controller. Verify that the platform explicitly lists DDR5-4800 or PC5-38400 support before purchase.

Pluspunten

  • ECC protection prevents data corruption in critical workloads
  • Registered signal processing improves stability on multi-module servers
  • DDR5-4800 speed delivers 4800 MHz bandwidth for demanding applications
  • 16 GB capacity supports larger datasets per module
  • CL40 latency balances timing with high-frequency operation

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

Does this DDR5 RDIMM fit a standard 288-pin server DIMM slot?

Yes, the 16 GB DDR5-4800 module uses the industry-standard 288-pin RDIMM form factor for server and workstation motherboards.

What is the correct orientation when seating this registered ECC module?

Align the off-centre notch on the gold edge connector with the key in the slot, press straight down until both retention clips click, and verify the module sits flush.

When should this DDR5-4800 RDIMM be replaced in a production server?

Replace the module if ECC correctable-error counts rise sharply, if memory diagnostics report uncorrectable failures, or during a planned capacity upgrade beyond 16 GB per slot.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.