Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Three white 140mm ARGB case fans with a 6-port hub

Montech

Montech HP140W3IN1 140mm ARGB PWM case fan 3-pack white

SKU CH-XE4S-FD9BW MPN HP140W3IN1

Three white 140 mm ARGB PWM fans with a 6-port hub, running 600–1600 RPM for 90.5 CFM at 29.2 dB

  • TypeCase Fan
  • Fan Size140mm
  • ColorWhite
  • LEDARGB
  • Quiet cooling at 29.2 dB maximum noise
  • Strong airflow up to 95.61 CFM for thermal headroom
  • Adjustable 600–1600 RPM via 4-pin PWM control
  • ARGB lighting adds colour to white 140mm frames
  • Three fans plus 6×6 hub simplify installation

Three-Fan ARGB Kit for Mid-Tower Builds

This pack contains three 140 mm white case fans with addressable RGB lighting and PWM control. They connect via standard 4-pin headers and include a 6-port hub to simplify cable routing. The rifle-bearing design targets users who want coordinated lighting and consistent airflow across intake or exhaust positions.

Sustained Airflow at 1600 RPM Maximum

Each fan spins between 600 and 1600 RPM, delivering up to 95.61 CFM in the supplier rating and 90.5 CFM in the specification table. The wide speed range lets the curve maintain pressure during extended gaming or rendering sessions without dropping to a low fixed speed. PWM control adjusts output dynamically so airflow matches thermal load over long periods.

29.2 dB Noise Rating at Full Speed

At the 1600 RPM ceiling the fans produce 29.2 dB, a level that stays audible but restrained inside a typical closed chassis. The rifle bearing reduces mechanical rattle during speed ramps, keeping acoustic output steady. Power draw follows the 4-pin PWM standard, so the motherboard or hub manages current without extra cabling.

Pluspunten

  • Quiet cooling at 29.2 dB maximum noise
  • Strong airflow up to 95.61 CFM for thermal headroom
  • Adjustable 600–1600 RPM via 4-pin PWM control
  • ARGB lighting adds colour to white 140mm frames
  • Three fans plus 6×6 hub simplify installation

Specificaties

TypeCase Fan
Fan Size140mm
ColorWhite
LEDARGB
Verzendgewicht0.73 kg
Pakketafmetingen178 × 152 × 89 mm

Andere versies van dit model

Nog 1 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How loud is the 29.2 dB noise level when three fans run at 1600 RPM all day?

At full speed each fan reaches 29.2 dB, so three together will be audible but not overwhelming in a typical case.

Does the included 6×6 hub need a separate power cable or does it run from the motherboard 4-pin header?

The hub connects to a single 4-pin PWM header and draws power from it, so no extra cables are required.

Can the ARGB lighting on these white 140mm fans sync with a 5 V addressable header on an older motherboard?

Yes, the fans use standard 5 V ARGB and will sync with any compatible 5 V header or controller.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.