Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Grey rectangular bench power supply with LCD display and front panel controls

myVolts

myVolts MCH-K305D adjustable power supply 30V 5A 150W

SKU CH-FX3Q-M3H6Z MPN MCH-K305D

An adjustable DC power supply delivering 0 to 30 volts at up to 5 amps with 150 watts output, overvoltage and over-temperature protection, milliamp resolution, and a high-contrast LCD display

  • TypeAT
  • Adjustable 0-30 V and 0-5 A for flexible bench testing
  • Switching regulator delivers >85 % efficiency with low 20 mA ripple
  • LCD shows voltage and current to ±0.5 % accuracy
  • CE certified with over-voltage, over-temperature and anti-shock protection
  • Compact 220×70×160 mm unit weighs about 2 kg

Adjustable DC power supply 0-30 V 5 A

The myVolts MCH-K305D is a switching DC regulator that delivers continuously adjustable output from 0 to 30 volts and 0 to 5 amps with a maximum of 150 watts. It is built for bench work such as electronic repair, experimental circuits and ageing tests where stable, low-ripple power is required.

Check mains voltage and load needs

The unit accepts 110 V or 220 V input at 50 Hz or 60 Hz so verify which mains supply is available at the bench. Ensure the device under test does not exceed 5 A or 150 W and that the operating environment stays within -20 °C to 80 °C with humidity below 90 %. The supply weighs about 2 kg and measures 220 mm deep by 70 mm wide by 160 mm high.

Replaces fixed-voltage bench units

This supply upgrades from single-output adapters when a project demands variable voltage and current with milliamp resolution and ±0.5 % display accuracy. Overvoltage, over-temperature and anti-shock protection plus CE certification make the jump worthwhile for labs that need programmable safety limits and a high-contrast LCD readout.

Pluspunten

  • Adjustable 0-30 V and 0-5 A for flexible bench testing
  • Switching regulator delivers >85 % efficiency with low 20 mA ripple
  • LCD shows voltage and current to ±0.5 % accuracy
  • CE certified with over-voltage, over-temperature and anti-shock protection
  • Compact 220×70×160 mm unit weighs about 2 kg

Specificaties

TypeAT

Vragen over dit artikel

Does the MCH-K305D include test leads or must they be bought separately?

The MCH-K305D is supplied as the bench unit only; test leads are not included and must be sourced separately.

Should I choose the 110 V or 220 V input version for my bench?

Select the version that matches your mains supply — the unit is built for either 110 V or 220 V operation at 50/60 Hz.

What does the 150 W rating mean when I am driving a 30 V load?

At 30 V the supply can deliver up to 5 A, giving the full 150 W; lower voltages allow the same 5 A up to the power limit.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.