Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green breakout board with ten black 6-pin cables attached

myVolts

myVolts Power Supply Breakout Board 10 Cable 6 pin 1600W

SKU CH-3E5P-58GQR

Breakout board with ten 6-pin PCI-E cables supports up to 1600W for server power supplies

  • TypeAT
  • Supports up to 1600W for high-demand mining rigs
  • 20Z copper PCB with solid capacitors ensures stable delivery
  • Nine 6-pin and one 4-pin PCI-E outputs included
  • Ten 6-pin cables at 50 cm length supplied ready to use
  • Compatible with multiple server PSU models including DPS-1200FB A

Mining Breakout Board 1600W

This breakout board distributes power from compatible server units to mining rigs. It provides nine 6-pin PCIe connectors and one 4-pin PCIe connector for graphics cards. The board is rated for a maximum of 1600W and uses a 20oz copper PCB with solid capacitor filtering. Ten 6-pin cables of approximately 50cm length are included.

Compatible Server PSU Check

Verify that your existing power supply appears on the supported model list before ordering. Accepted units include DPS-800GB A, DPS-1200FB A, DPS-1200QB A, PS-2751-5Q, PS-2751-LF-1F, HSTSN-PL12, DPS-700LB D, PS-2112-5L and DPS-750RB. The board is designed for 12V output server supplies only. Builders needing a different pin layout or higher per-connector current should look elsewhere.

Sustained Load Behaviour

The 20oz copper PCB and solid capacitor filter are built to handle continuous 1600W delivery during extended mining sessions. Nine 6-pin and one 4-pin outputs share the total capacity across multiple GPUs. The 50cm cables keep voltage drop low at full load. Rigs demanding more than 1600W or requiring 8-pin or 12VHPWR connectors cannot use this board.

Pluspunten

  • Supports up to 1600W for high-demand mining rigs
  • 20Z copper PCB with solid capacitors ensures stable delivery
  • Nine 6-pin and one 4-pin PCI-E outputs included
  • Ten 6-pin cables at 50 cm length supplied ready to use
  • Compatible with multiple server PSU models including DPS-1200FB A

Specificaties

TypeAT

Vragen over dit artikel

What comes in the box and what else do I need to buy?

The package includes one breakout board and ten 50 cm 6-pin PCI-E cables. You must supply a compatible server PSU such as a DPS-1200FB A or DPS-1200QB A, which are not included.

Which breakout board version matches my server PSU?

This board is designed for the listed 12 V server units including DPS-800GB A, DPS-1200FB A, DPS-1200QB A, PS-2751-5Q, PS-2751-LF-1F, HSTSN-PL12, DPS-700LB D, PS-2112-5L and DPS-750RB. Choose the board that matches your exact PSU model.

What does the 1600 W rating mean when the board is installed?

The board can pass up to 1600 W from a compatible 12 V server PSU through its nine 6-pin and one 4-pin PCI-E outputs, using 20Z copper PCB and solid capacitor filtering for stable delivery to mining GPUs.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.