Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green and black rectangular breakout board with ten 6-pin ports

myVolts

myVolts Power Supply Breakout Board Adapter 10 x 6pin Ports

SKU CH-F5K3-GMKVK

This power-supply breakout board splits a single AT unit into ten 6-pin connectors for multi-GPU rigs

  • TypeAT
  • Splits one AT PSU into ten 6-pin VGA connectors
  • Delivers 12 V power through copper conductors for stable mining loads
  • Compact 9 × 4.3 × 3 cm green-and-black board fits tight rigs
  • Durable copper construction handles continuous high-current operation

Mining Rig Power Distribution

This breakout board adapter provides ten 6-pin ports to split a single power supply for GPU mining rigs. It connects HP and compatible PSU outputs to multiple VGA cables using copper conductors rated for 12v operation. The compact green and black board measures approximately 3.54 by 1.69 by 1.18 inches.

Expanding Single PSU Capacity

Builders adding more graphics cards than their power supply's native connectors allow will find this adapter necessary. It replaces the need for a second power supply unit when the existing unit has sufficient wattage but insufficient 6-pin leads. The jump is worth it only when the PSU can safely deliver the total combined load.

Pluspunten

  • Splits one AT PSU into ten 6-pin VGA connectors
  • Delivers 12 V power through copper conductors for stable mining loads
  • Compact 9 × 4.3 × 3 cm green-and-black board fits tight rigs
  • Durable copper construction handles continuous high-current operation

Specificaties

TypeAT

Vragen over dit artikel

Will this breakout board fit inside a standard mining chassis measuring 10 cm depth?

The board measures 9 cm long by 4.3 cm wide and 3 cm high, so it fits within a 10 cm deep bay with clearance.

How do I connect the AT-type power supply to the ten 6-pin ports without shorting the sense wire?

Plug the AT supply's main connector into the board's input header, then attach each GPU cable to a 6-pin port; the board routes 12 V directly, so no sense-wire jumper is needed.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.