Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR5 RDIMM modules without heat spreaders in a 128GB kit

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 5600 CL46 1.1V ECC RDIMM Supermicro X14SRA-T

SKU CH-KMB2-PCYS0

128 GB DDR5-5600 ECC RDIMM kit with two 64 GB modules, CL46 at 1.1 V, validated for Supermicro X14SRA-T

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Nog 4 configuraties tonen
  • 128 GB total capacity for high-density server workloads with 2×64 GB modules
  • DDR5 5600 speed (PC5-44800) delivers rated bandwidth for Supermicro X14SRA-T
  • Registered ECC architecture with CL46 latency offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank matches the board's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the Supermicro X14SRA-T DIMM slots without adapters

128GB DDR5 ECC RDIMM Kit

This 128GB kit delivers two 64GB DDR5 5600 registered ECC modules built for the Supermicro X14SRA-T motherboard. The 2Rx4 organisation and 1.10V operation match the board's memory controller requirements exactly so the full capacity is recognised at rated speed without manual tuning.

Replacing slower or smaller DDR5 RDIMMs

If your server currently runs lower-frequency registered ECC modules or a partially populated configuration this kit restores full-channel bandwidth and enables the maximum supported capacity per slot. The jump is worth it when workloads demand sustained throughput and error correction across every populated channel.

Build integration for Supermicro X14SRA-T

The 288-pin RDIMM form factor fits only boards wired for registered memory; UDIMM or SODIMM slots will not accept these modules. Population rules in the motherboard manual dictate which slots to fill first so the memory controller remains stable at 5600 MT/s across the full 128GB.

Pluspunten

  • 128 GB total capacity for high-density server workloads with 2×64 GB modules
  • DDR5 5600 speed (PC5-44800) delivers rated bandwidth for Supermicro X14SRA-T
  • Registered ECC architecture with CL46 latency offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank matches the board's memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the Supermicro X14SRA-T DIMM slots without adapters

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 288-pin RDIMM modules fit the Supermicro X14SRA-T motherboard slots?

Yes, the 288-pin Registered DDR5 RDIMM form factor matches the slots on the Supermicro X14SRA-T motherboard.

What is the correct installation order for the two 64GB modules on this board?

Install the modules in the DIMM population sequence specified in the Supermicro X14SRA-T manual to ensure the 128GB kit is recognised at full capacity.

Do these Samsung, Micron or Hynix IC modules require any firmware updates or periodic maintenance?

No firmware updates or scheduled maintenance are needed; the Registered ECC design provides ongoing error correction for the module lifetime.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.