BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00277711BTC
Op voorraad
NEMIX RAM
NEMIX RAM 128GB (4 x 32GB) DDR4 2666MHz PC4-21300 2Rx8 1.2V 288-PIN ECC UDIMM server RAM
A 128GB kit of four 32GB DDR4 2666MHz ECC unbuffered DIMMs with CAS latency 19 at 1.2V
- Capacity128GB (4 x 32GB)
- SpeedDDR4 2666 (PC4 21300)
- CAS Latency19
- Voltage1.2V
- ECCYes
- Buffered/RegisteredUnbuffered
- 128GB total capacity from four 32GB modules
- ECC protection detects and corrects single-bit errors
- DDR4 2666MHz speed with PC4-21300 bandwidth rating
- 2V operation reduces power draw and heat
- Unbuffered 288-pin UDIMM with 2Rx8 organisation
128GB DDR4 ECC UDIMM Kit
This 128GB kit contains four 32GB DDR4 2666MHz modules built for servers and workstations that require ECC error correction. The unbuffered design suits platforms that accept standard UDIMM population without registered buffering. Each module operates at 1.2V with a CAS latency of 19.
288-Pin Unbuffered Build
Gold-contact 288-pin UDIMMs install directly into compatible DDR4 slots without extra registration circuitry. The 2Rx8 organisation and major-brand Samsung, Micron or Hynix chips provide stable signal integrity at the rated PC4-21300 speed. Standard height allows use in dense multi-DIMM configurations where clearance is tight.
Upgrade from Lower Capacity or Non-ECC
Replaces smaller DDR4 kits or non-ECC memory when data integrity and 128GB total capacity are required. The jump is worth it for virtualization hosts, database nodes or ZFS storage servers that need maximum supported density per channel and single-bit error correction. Not for platforms limited to registered DIMMs or speeds above 2666MHz.
Pluspunten
- 128GB total capacity from four 32GB modules
- ECC protection detects and corrects single-bit errors
- DDR4 2666MHz speed with PC4-21300 bandwidth rating
- 2V operation reduces power draw and heat
- Unbuffered 288-pin UDIMM with 2Rx8 organisation
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: ME21300-328K4-SM-SYS-5019C-M |
| Part Number | Part#: ME21300-328K4-SM-SYS-5019C-M |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | 19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Vragen over dit artikel
What speed does the DDR4 2666 PC4-21300 rating actually deliver?
The kit runs at 2666 MT/s with a PC4-21300 bandwidth rating and CAS latency 19.
Will the 288-pin ECC UDIMM modules fit my server board?
Each 32 GB module uses the standard 288-pin DDR4 UDIMM form factor and requires a slot that accepts unbuffered ECC memory.
How do I install the four 32 GB sticks correctly?
Populate all four slots in the order your motherboard manual specifies for quad-channel operation; the common mistake is mixing slot sequence.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00280295BTC
Op voorraad
