Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 128GB DDR5 6400MHz PC5-51200 2Rx4 CL52 1.1V 288-PIN ECC RDIMM Supermicro H14SSF memory upgrade

SKU CH-41YH-DJTBH

128GB DDR5 6400MHz ECC registered RDIMM validated for Supermicro H14SSF servers

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Exact-match 128 GB DDR5-6400 module recognised at full rated speed
  • Registered 2Rx4 architecture keeps every slot stable when fully populated
  • On-die ECC corrects single-bit errors before they corrupt data
  • 10 V operation matches the board's memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14SSF motherboard

Exact-match DDR5 upgrade for Supermicro H14SSF

This NEMIX RAM module delivers 128GB of DDR5 6400 memory in a single 288-pin RDIMM. It operates at 1.1V with CL52 latency and uses a 2Rx4 registered ECC design. The specification matches the Supermicro H14SSF motherboard requirements so the system recognises the full capacity at rated speed.

Suited for administrators populating every slot

Registered buffering offloads the memory controller, allowing full population without signal degradation, while ECC corrects single-bit errors to prevent silent data corruption. Buyers who need unbuffered UDIMMs, SODIMMs, or non-ECC memory for a workstation or desktop platform should look elsewhere.

Simple slot insertion but strict population rules

The 288-pin RDIMM seats like any DIMM, yet the H14SSF manual defines exact slot order and maximum capacity per channel. Ignoring those rules is the most common cause of boot failure or reduced speed, so consult the motherboard documentation before installing.

Pluspunten

  • Exact-match 128 GB DDR5-6400 module recognised at full rated speed
  • Registered 2Rx4 architecture keeps every slot stable when fully populated
  • On-die ECC corrects single-bit errors before they corrupt data
  • 10 V operation matches the board's memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14SSF motherboard

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Vragen over dit artikel

What motherboard slot does the 288-pin DDR5 RDIMM require on the Supermicro H14SSF?

The module uses a 288-pin DDR5 RDIMM form factor that matches the registered DIMM slots on the Supermicro H14SSF motherboard.

Will the registered ECC design work with existing RDIMMs already installed in the server?

Yes, the 2Rx4 registered ECC architecture is designed to operate alongside other registered DIMMs following the board's population rules.

How can I confirm the kit is running at DDR5 6400 with CL52 after installation?

Check the BIOS memory information or OS tools such as dmidecode to verify the speed shows 6400 MT/s and the CAS latency reads 52.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.