Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR3 SODIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HC-1521P memory upgrade

SKU CH-SFXY-9H3BR

DDR3 1333 SODIMM kit adds 16 GB across two 8 GB modules for POSIFLEX HC-1521P terminals

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 16GB dual-channel kit speeds up POS terminals
  • DDR3 1333 PC3-10600 matches system bus speed
  • 35V low-voltage modules reduce power draw
  • 204-pin SODIMM fits Posiflex HC-1521P slots
  • CL9 latency with Samsung Micron Hynix chips ensures stability

POSIFLEX HC-1521P memory upgrade

This 16 GB kit contains two 8 GB DDR3 SODIMM modules built for the POSIFLEX HC-1521P touch-screen infotainment terminal. It is intended for technicians and system integrators who need to restore or expand memory in that specific point-of-sale platform.

Installation fits the 204-pin DDR3 SODIMM slots

The modules are non-ECC, unbuffered and keyed for 204-pin DDR3 sockets, so they drop into the terminal without extra cables or brackets. Using the matched pair frees the second slot for future expansion if the board supports more than two modules.

Low-voltage DDR3 operation

Rated at 1.35 V with a CL9 latency at 1333 MHz, the kit draws less power than standard 1.50 V DDR3 while running at stock speed. No heat spreaders are fitted, so airflow in the compact terminal chassis handles cooling silently.

Pluspunten

  • 16GB dual-channel kit speeds up POS terminals
  • DDR3 1333 PC3-10600 matches system bus speed
  • 35V low-voltage modules reduce power draw
  • 204-pin SODIMM fits Posiflex HC-1521P slots
  • CL9 latency with Samsung Micron Hynix chips ensures stability

Specificaties

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Vragen over dit artikel

Will the 1.35V rating hold steady under continuous load?

The modules are specified at 1.50V and DDR3 1333 PC3-10600 CL9, so the system will run them at that voltage during sustained operation.

How much heat do these SODIMMs produce when running all day in a POS terminal?

They are unbuffered non-ECC DDR3 SODIMMs without heat spreaders, so thermal output is low and managed by the terminal's existing airflow.

Does the POSIFLEX HC-1521P need any firmware update before installing this 2Rx8 kit?

The kit is built for the POSIFLEX POS series and uses standard 204-pin DDR3 SODIMM form factor; no extra firmware step is mentioned.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.