Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR4 ECC UDIMM sticks, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2666 ECC UDIMM CL19 1.2V 288-Pin Kit

SKU CH-JRQK-QJ9T6

A 16 GB dual-channel DDR4-2666 ECC unbuffered kit (2 × 8 GB, CL19, 1.2 V, 288-pin) for server and workstation stability

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC protection guards data integrity on every cycle
  • 2666 MHz DDR4 speed handles demanding server workloads
  • 16 GB kit in two 8 GB modules scales capacity easily
  • 2 V operation keeps power draw low in dense racks
  • Major OEM chips from Samsung, Micron or Hynix ensure consistent reliability

16 GB DDR4 ECC UDIMM kit

This kit provides 16 GB of DDR4 ECC unbuffered memory in two 8 GB modules. It targets servers, workstations and NAS devices that require error-correcting code for data integrity. IT professionals and enthusiast builders use it to expand compatible platforms.

DDR4 2666 CL19 1.2 V specification

The modules run at DDR4 2666 (PC4 21300) with a CAS latency of CL19 and operate at 1.20 V. Each stick is a single-rank 1Rx8 design using major OEM chips from Samsung, Micron or Hynix. This exact speed, latency and voltage combination determines whether the kit matches the motherboard requirements.

Thermals and power in normal use

Without heat spreaders the modules rely on case airflow for cooling and run at the standard 1.20 V DDR4 voltage. Power draw stays within the normal range for unbuffered DDR4 ECC UDIMMs under typical workloads. Acoustic output is silent because no active cooling is present.

Pluspunten

  • ECC protection guards data integrity on every cycle
  • 2666 MHz DDR4 speed handles demanding server workloads
  • 16 GB kit in two 8 GB modules scales capacity easily
  • 2 V operation keeps power draw low in dense racks
  • Major OEM chips from Samsung, Micron or Hynix ensure consistent reliability

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME21300-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What does CL19 mean when the kit runs at DDR4 2666 in a real system?

CL19 sets the delay between a read command and data availability at 19 clock cycles; at DDR4 2666 speed this determines the latency before each access begins

What does the PC4 21300 rating cap in practice?

PC4 21300 specifies a peak transfer rate of 21 300 MB/s per module; the motherboard memory controller and BIOS settings determine the actual throughput achieved

What physical slot and clearance does this 288-pin UDIMM kit need?

Each module uses a standard 288-pin DDR4 UDIMM slot and has no heat spreader, so it fits in low-profile server and workstation boards with tight DIMM spacing

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.