BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00277553BTC
Op voorraad
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 260-pin SODIMM kit for POSIFLEX TK-3250
DDR4 3200 SODIMM kit with two 8 GB modules at CL22, 1.2 V, 260-pin, validated for the POSIFLEX TK-3250 kiosk
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB kit boosts multitasking on POSIFLEX TK-3250
- DDR4 3200 speed matches system specification
- CL22 latency keeps data flow smooth
- 2 V modules run cool in kiosk enclosures
- 260-pin SODIMM fits the slot without adapters
Kit for POSIFLEX TK-3250
This NEMIX RAM kit provides 16GB of DDR4 memory in two 8GB SODIMM modules built for the POSIFLEX TK-3250 kiosk. It targets system integrators and IT technicians who maintain or upgrade these specific point-of-sale terminals. The modules are unbuffered, non-ECC and validated for the platform.
DDR4 3200 CL22 260-pin SODIMM
The kit runs at DDR4 3200 (PC4-25600) with a CAS latency of CL22 and a 2Rx8 rank configuration. Each 260-pin module operates at 1.20V using major OEM chips from Samsung, Micron or Hynix. This exact speed, latency, voltage and form factor combination is the single specification that determines compatibility with the target system.
Thermals and power in normal use
Without a heat spreader, the modules rely on the chassis airflow of the POSIFLEX TK-3250 for cooling. At the standard 1.20V operating voltage, power draw remains low during typical kiosk workloads. The unbuffered design adds no active components, so acoustic output is unaffected by the memory itself.
Pluspunten
- 16 GB kit boosts multitasking on POSIFLEX TK-3250
- DDR4 3200 speed matches system specification
- CL22 latency keeps data flow smooth
- 2 V modules run cool in kiosk enclosures
- 260-pin SODIMM fits the slot without adapters
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM POS Memory KIT |
Vragen over dit artikel
What does the DDR4 3200 speed mean when the kit is installed in the POSIFLEX TK-3250?
The modules run at 3200 MT/s with CL22 latency, delivering the rated PC4-25600 bandwidth once the system recognises the 2Rx8 organisation.
How does the 260-pin SODIMM interface limit the upgrade?
The 260-pin DDR4 SODIMM form factor fits only the SO-DIMM slots on the TK-3250; it cannot be used in full-size DIMM or DDR5 slots.
What physical clearance is needed for the two 8 GB modules?
Each module is a standard 260-pin SODIMM without a heat spreader, so it fits the factory memory compartment of the TK-3250 without extra height.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00280135BTC
Op voorraad
