BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00278972BTC
Op voorraad
NEMIX RAM
NEMIX RAM 16GB DDR4 2400 CL17 260-PIN SODIMM QNAP TVS-673e 873e memory upgrade
A 16 GB DDR4 SODIMM running at 2400 MHz with CL17 timing, built for QNAP TVS-673e and TVS-873e NAS units
- Capacity16GB
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 2400 MHz module expands QNAP TVS-673e or TVS-873e NAS memory
- CL17 latency at 1.20 V delivers responsive performance for demanding workloads
- 260-pin SODIMM form factor fits directly into compatible QNAP NAS slots
- Built with major OEM chips from Samsung Micron or Hynix for proven reliability
- Single 16 GB 2Rx8 rank simplifies upgrade without mixing modules
QNAP NAS memory upgrade
This 16 GB DDR4 SODIMM is built for QNAP TVS-673e and TVS-873e NAS units. It targets administrators who need more capacity for virtualization or heavy file workloads. The module runs at 2400 MT/s with CL17 latency at 1.20 V. It fits the 260-pin SODIMM slots in those specific models.
Single-module kit simplifies installation
The package contains one 16 GB stick so you can populate a single empty slot or match an existing module. No extra cables, brackets or software licences are included. The unbuffered non-ECC design means the NAS treats it as standard system memory. Installation follows the standard SODIMM procedure described in the QNAP manual.
DDR4 SODIMM limits apply
The 260-pin DDR4 interface caps transfer rate at the JEDEC 2400 standard used here; faster DDR4 modules will downclock to this speed. Non-ECC operation offers no error correction for critical data. The 2Rx8 organisation occupies one rank per channel, so total system rank limits on the NAS motherboard still apply.
Pluspunten
- 16 GB DDR4 2400 MHz module expands QNAP TVS-673e or TVS-873e NAS memory
- CL17 latency at 1.20 V delivers responsive performance for demanding workloads
- 260-pin SODIMM form factor fits directly into compatible QNAP NAS slots
- Built with major OEM chips from Samsung Micron or Hynix for proven reliability
- Single 16 GB 2Rx8 rank simplifies upgrade without mixing modules
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR4 2666MHZ Non-ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS19200-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM |
Vragen over dit artikel
Will the 16GB DDR4 2400 SODIMM need replacement as my QNAP TVS-673e workloads grow?
The module is a fixed 16GB capacity; if your NAS later requires more memory you would add or replace modules rather than service this stick.
What limit appears first when the TVS-873e runs this CL17 2Rx8 kit at full load for hours?
The 2400 MT/s data rate and CL17 latency set the throughput ceiling before thermal or power limits become a factor.
How much heat and power does the 1.20 V 260-pin SODIMM produce during all-day operation in a QNAP NAS?
At 1.20 V the module draws minimal power and runs without a heat spreader, so it adds little heat to the chassis.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00281568BTC
Op voorraad
