NEMIX RAM
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 62.908,99
0.78834309BTC
Op voorraad
NEMIX RAM
NEMIX RAM 16GB DDR4 2666 CL19 ECC UDIMM server RAM
16 GB DDR4 2666 ECC unbuffered UDIMM with CL19 latency for QNAP NAS servers
- Capacity16GB
- Type288-Pin DDR4 ECC UDIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCYes
- 16 GB capacity doubles memory headroom for virtualisation workloads
- ECC protection detects and corrects single-bit errors automatically
- DDR4 2666 speed matches QNAP NAS-ready specifications
- Unbuffered 288-pin UDIMM installs in standard server slots
- 2 V operation reduces power draw under sustained load
16 GB DDR4 ECC UDIMM for QNAP NAS
This 16 GB DDR4 2666 CL19 ECC UDIMM module adds error-correcting memory to compatible QNAP NAS devices. It runs at 1.2 V on a 288-pin unbuffered DIMM with a 2Rx8 organisation. The kit contains a single stick built with major OEM DRAM chips.
Suits QNAP NAS upgrades needing ECC.
The module targets IT professionals upgrading QNAP NAS units that require DDR4 ECC unbuffered memory. Systems that only accept non-ECC UDIMMs or registered DIMMs cannot use this part. Buyers without a compatible QNAP model should look at something else.
Single 16 GB DDR4 2666 CL19 ECC UDIMM at 1.2 V
The decisive specification is the 16 GB capacity combined with DDR4 2666 speed, CL19 latency, ECC support and unbuffered 288-pin form factor. Match these exact parameters to your NAS motherboard manual before ordering.
Pluspunten
- 16 GB capacity doubles memory headroom for virtualisation workloads
- ECC protection detects and corrects single-bit errors automatically
- DDR4 2666 speed matches QNAP NAS-ready specifications
- Unbuffered 288-pin UDIMM installs in standard server slots
- 2 V operation reduces power draw under sustained load
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Device Memory |
| Model | QNAP NAS Memory |
| Part Number | ME21300-628K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
Vragen over dit artikel
How can I confirm the 16GB DDR4 2666 CL19 ECC UDIMM is detected and running at PC4-21300 speed after installation?
Enter the BIOS or UEFI on boot and verify the memory information screen shows 16GB capacity, 2666 MT/s data rate, CL19 timings and ECC enabled for the installed module.
What comes with the ME21300-628K1 module and is anything else required for a QNAP NAS upgrade?
The package contains the single 16GB 288-pin DDR4 ECC UDIMM; no extra cables, brackets or heat spreaders are included or needed for compatible QNAP NAS slots.
Which version should I choose if my QNAP NAS requires 1.2V 2Rx8 DDR4 2666 ECC unbuffered DIMMs?
Select this ME21300-628K1 kit — it matches the 1.20V voltage, 2Rx8 rank, CL19 latency and PC4-21300 speed specified for those QNAP models.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 57.634,99
0.72225203BTC
Op voorraad
NEMIX RAM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 53.038,99
0.66465733BTC
Op voorraad
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 70.395,99
0.88216632BTC
Op voorraad