Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board SODIMM module with black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 1.2V 2Rx8 260-pin SODIMM POSIFLEX EK-1632 memory upgrade

SKU CH-1GD5-WGDPT

16 GB DDR4 3200 CL22 SODIMM upgrades POSIFLEX EK-1632 kiosks with 2Rx8 unbuffered memory

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB DDR4 3200 boosts kiosk responsiveness
  • CL22 1.2V operation lowers system power draw
  • 2Rx8 260-pin SODIMM fits POSIFLEX EK-1632 slot
  • Major OEM Samsung Micron Hynix chips ensure reliability
  • Non-ECC unbuffered design matches Mercury Series requirements

Compatible POSIFLEX EK-1632 SODIMM

This 16 GB DDR4 module is built for the POSIFLEX EK-1632 Mercury Series kiosk. It targets technicians who need a direct-fit memory upgrade for that specific point-of-sale platform.

260-pin DDR4 form factor

The stick uses a standard 260-pin SODIMM edge connector and runs at 1.2 V, so it slots into the kiosk's existing memory socket without adapters. Unbuffered, non-ECC operation keeps the installation path identical to the factory module it replaces.

CL22 latency at 3200 MT/s

Rated at PC4-25600 with a 2Rx8 organisation, the module delivers 16 GB of capacity at CAS 22. It handles typical kiosk workloads and multi-tasking within that single-slot limit; systems requiring more than 16 GB or lower latency must look beyond this part.

Pluspunten

  • 16GB DDR4 3200 boosts kiosk responsiveness
  • CL22 1.2V operation lowers system power draw
  • 2Rx8 260-pin SODIMM fits POSIFLEX EK-1632 slot
  • Major OEM Samsung Micron Hynix chips ensure reliability
  • Non-ECC unbuffered design matches Mercury Series requirements

Specificaties

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Vragen over dit artikel

Will the CL22 latency limit throughput during sustained workloads?

CL22 is the rated CAS latency at DDR4 3200; it sets the timing floor for every access cycle.

Does the module run hot or draw extra power in continuous operation?

It operates at 1.2 V without a heat spreader, matching standard DDR4 SODIMM power and thermal envelope.

Must the POSIFLEX EK-1632 already have a free 260-pin SODIMM slot?

Yes, the upgrade installs in a single 260-pin DDR4 SODIMM socket on the EK-1632 motherboard.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.