eshinreal
eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
US$ 25,99
0.00033339BTC
Op voorraad
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 1Rx4 ECC RDIMM Gigabyte MZ01-CE0 EPYC memory upgrade
16 GB DDR4-3200 ECC registered DIMM for Gigabyte EPYC servers, CL22 at 1.2 V
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 registered ECC boosts server throughput
- CL22 latency at 1.20 V keeps power draw low
- 1Rx4 single-rank layout simplifies memory population rules
- 288-pin RDIMM form factor fits Gigabyte MZ01-CE0 EPYC boards
- Major OEM Samsung Micron Hynix chips ensure stable operation
16 GB DDR4 ECC RDIMM for Gigabyte MZ01-CE0
This 16 GB DDR4 3200 CL22 registered DIMM is built for the Gigabyte MZ01-CE0 motherboard running AMD EPYC processors. It delivers error-correcting code protection and registered signalling for stable server and workstation operation. The module runs at 1.2 V with a 1Rx4 organisation.
Replaces non-ECC or slower DDR4 DIMMs
Swapping unbuffered or lower-speed memory for this PC4-25600 registered kit adds data-integrity checking and the electrical buffering required by multi-socket EPYC platforms. The upgrade is worthwhile when your workloads demand ECC reliability and the motherboard qualified-vendor list includes this part number.
Verify motherboard slot population rules
Confirm the MZ01-CE0 supports 288-pin DDR4 RDIMMs at 3200 MT/s and check the maximum rank-per-channel limit before ordering. Ensure the BIOS is current enough to recognise 1Rx4 modules and that your chassis airflow can accommodate modules without heat spreaders.
Pluspunten
- 16 GB DDR4 3200 registered ECC boosts server throughput
- CL22 latency at 1.20 V keeps power draw low
- 1Rx4 single-rank layout simplifies memory population rules
- 288-pin RDIMM form factor fits Gigabyte MZ01-CE0 EPYC boards
- Major OEM Samsung Micron Hynix chips ensure stable operation
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | Gigabyte Server Motherboard Compatible Series Memory |
| Model | Gigabyte DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-614K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Gigabyte |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
Vragen over dit artikel
Will the 288-pin DDR4 RDIMM fit the DIMM slots on a Gigabyte MZ01-CE0 motherboard?
Yes, this module is a 288-pin DDR4 RDIMM built to the standard RDIMM form factor that the MZ01-CE0 expects.
Is there a specific slot order or BIOS setting needed when installing this 1Rx4 registered ECC module?
Install the stick in the channel and slot sequence shown in the MZ01-CE0 manual; the registered buffer requires the platform to be configured for registered DIMMs, which the EPYC platform handles automatically.
When should the 16 GB DDR4 3200 CL22 1.2 V module be replaced in a server running continuously?
Replace it if memory diagnostics report uncorrectable ECC errors, if the system logs repeated corrected-error thresholds, or during a planned capacity upgrade.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
SMUGDESK
SMUGDESK PCIe USB 3.2 Gen 2 Card 10Gbps Type A Type C Type E 19/20Pin
US$ 32,99
0.00042318BTC
Op voorraad
Vszerda
Vszerda UC-087-4P 4-port PCIe x1 to 2 USB 3.0 and 2 USB-C expansion card
US$ 23,99
0.00030773BTC
Op voorraad
Vszerda
Vszerda UC-087-2P 2 Port PCIe x1 to USB-C Expansion Card with 80/120mm Bracket
US$ 21,99
0.00028208BTC
Op voorraad