Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular memory module with gold edge connectors and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 1Rx8 1.2V 288-Pin UDIMM memory upgrade for Supermicro X12STE-F / X12STD-F

SKU CH-1FSA-WV9Y2

16 GB DDR4 3200 CL22 UDIMM upgrade verified for Supermicro X12STE-F and X12STD-F boards

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo

Size 16GB

  • Exact-match 16 GB DDR4-3200 CL22 1Rx8 1.2 V UDIMM recognised at full speed
  • Verified fit for Supermicro X12STE-F / X12STD-F 288-pin unbuffered slots
  • Built with Samsung, Micron or Hynix chips tested at rated timing and voltage
  • Check manual for supported capacity and DIMM population before installing
  • Lifetime replacement warranty with free US-based technical support

16GB DDR4 3200 UDIMM for Supermicro X12STE-F

This 16 GB DDR4-3200 module is built for the Supermicro X12STE-F and X12STD-F motherboards. It uses a 288-pin unbuffered UDIMM form factor with 1Rx8 organisation. The non-ECC design matches the desktop-class memory controller on these boards.

DDR4-3200 speed and CL22 timing limits

The module runs at 3200 MT/s with a CAS latency of CL22 at 1.2 V. This is the standard JEDEC data rate for DDR4-3200; the memory controller will not exceed this speed without manual overclocking. Bandwidth is capped at the PC4-25600 rating.

Major OEM chips and no heat spreader

Chips come from Samsung, Micron or Hynix and are tested at the rated speed, timing and voltage. The module has no heat spreader, so it fits tight DIMM slots without clearance issues. The 288-pin edge connector keys only into DDR4 UDIMM sockets.

Pluspunten

  • Exact-match 16 GB DDR4-3200 CL22 1Rx8 1.2 V UDIMM recognised at full speed
  • Verified fit for Supermicro X12STE-F / X12STD-F 288-pin unbuffered slots
  • Built with Samsung, Micron or Hynix chips tested at rated timing and voltage
  • Check manual for supported capacity and DIMM population before installing
  • Lifetime replacement warranty with free US-based technical support

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD25600-618K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Which capacity should I select for the Supermicro X12STE-F or X12STD-F?

The module is a single 16 GB DDR4 UDIMM; add one or more to match the board's supported population rules and total capacity limit.

What does the 3200 speed rating mean once installed in the motherboard?

The DIMM runs at DDR4 3200 with CL22 timing at 1.2 V, delivering the rated transfer rate the memory controller expects for this platform.

Does the 288-pin DDR4 interface limit the usable speed on these boards?

The 288-pin unbuffered non-ECC UDIMM matches the motherboard's native DDR4 3200 specification, so the full rated speed is supported without downclocking.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.