Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM CL22 2Rx8 THINKMATE QF4-14TP memory upgrade

SKU CH-VA35-Y3HD0

Adds 16 GB of DDR4 3200 ECC registered memory to a THINKMATE QF4-14TP workstation

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for server reliability
  • 3200 MHz DDR4 speed meets PC4-25600 bandwidth demands
  • 2 V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits THINKMATE QF4-14TP workstations

ThinkMate QF4-14TP compatible DDR4 module

This 16 GB DDR4 3200 ECC RDIMM is built for the ThinkMate QF4-14TP workstation. It adds registered, error-correcting memory to systems that require stability under sustained workloads. The single-rank 2Rx8 organisation fits a standard 288-pin DDR4 slot.

Registered ECC design for server boards

Registered signalling reduces electrical load on the memory controller, allowing larger populations of modules. ECC detects and corrects single-bit errors to protect data integrity. The module runs at 1.20 V with CL22 latency and carries no heat spreader, so it relies on chassis airflow.

Suited for ThinkMate QF4-14TP upgrades

Ideal for administrators expanding memory in a verified ThinkMate platform. Builders needing non-ECC UDIMMs, higher frequencies, or consumer desktop compatibility should select a different module type.

Pluspunten

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for server reliability
  • 3200 MHz DDR4 speed meets PC4-25600 bandwidth demands
  • 2 V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits THINKMATE QF4-14TP workstations

Specificaties

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Vragen over dit artikel

What latency ceiling does the CL22 rating impose on sustained throughput?

CL22 at 3200 MT/s defines the minimum cycle delay; every memory request waits at least that many clock cycles, so sustained bandwidth cannot exceed what the latency window allows.

How much heat and power does a 1.20 V registered DIMM add when running continuously?

At 1.20 V the module draws modest power and produces little heat; the registered buffer adds slight overhead, but with no heat spreader the DIMM relies on chassis airflow to stay cool during all-day operation.

Which slot type and system must already be present for this 288-pin RDIMM to function?

A DDR4 RDIMM slot in a Thinkmate QF4-14TP workstation is required; the 288-pin registered form factor will not fit standard UDIMM slots or non-ECC platforms.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.