Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR5 SODIMM module with black chips, no heat spreader, 262 gold pins visible

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 262-Pin SODIMM memory upgrade

SKU CH-DZJS-CW6KT

16 GB DDR5 4800 CL40 SODIMM module designed for Biostar BITWL-IHT industrial motherboards

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB DDR5 capacity boosts multitasking headroom
  • 4800 MT/s speed feeds data to the CPU faster
  • CL40 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • 262-pin SODIMM fits compatible Biostar industrial boards

Targeted System Upgrade

This 16GB DDR5 module is built for the BIOSTAR BITWL-IHT Thin Mini-ITX industrial motherboard. It delivers a direct memory upgrade for embedded systems and compact industrial PCs that require SODIMM form-factor memory. The single 16GB stick simplifies installation in space-constrained boards with limited slots.

Compatibility Fit

It suits integrators and technicians maintaining or upgrading that specific Biostar platform. Builders working on standard consumer laptops or desktops with different pin-outs, voltage requirements, or BIOS constraints should look elsewhere. Systems requiring ECC error correction or registered buffering are not supported by this non-ECC unbuffered design.

Decisive Specification

The 262-pin DDR5 SODIMM interface running at 4800MHz with CL40 latency and 1.1V operation determines fit. This exact combination of pin count, generation, speed, timing, and voltage must match the motherboard specification for the system to boot and run stably.

Pluspunten

  • 16 GB DDR5 capacity boosts multitasking headroom
  • 4800 MT/s speed feeds data to the CPU faster
  • CL40 latency keeps response tight under load
  • 1 V operation reduces power draw and heat
  • 262-pin SODIMM fits compatible Biostar industrial boards

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered SODIMM Memory
Part NumberMS38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemBiostar
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1 x 16GB) DDR5 4800MHz PC5-38400 1Rx8 1.1V 262-PIN Non-ECC SODIMM

Vragen over dit artikel

Will the 262-pin DDR5 SODIMM fit the BIOSTAR BITWL-IHT Thin Mini-ITX industrial motherboard?

Yes, the module is a 262-pin DDR5 SODIMM built for the BIOSTAR BITWL-IHT Thin Mini-ITX industrial motherboard. The 1.1 V, CL40, 1Rx8 specification matches the board's memory slot requirements.

How do I install the SODIMM and what step is often missed?

Power off the system, open the chassis, align the notch on the 262-pin DDR5 SODIMM with the slot key, insert at an angle, then press down until the side clips lock. The step often missed is fully seating the module so both clips click into place.

What maintenance or replacement will the 16 GB DDR5 module need later?

No scheduled maintenance is required for the 16 GB DDR5 SODIMM. If a memory error appears, reseat the module or test with a known-good stick. The product carries a lifetime replacement warranty from the manufacturer.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.