Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green circuit boards with black memory chips and gold connectors lying flat

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 ECC UDIMM Supermicro H14SRV-HLN4F memory upgrade

SKU CH-EEKM-VWJ42

192 GB kit of four 48 GB DDR5 ECC unbuffered UDIMMs running at 5600 MT/s with CL46 latency and 1.1 V for the Supermicro H14SRV-HLN4F motherboard

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

  • 192 GB capacity across four 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • ECC unbuffered UDIMM corrects single-bit errors automatically
  • 1 V operation matches the board's voltage requirement
  • 288-pin 2Rx8 form factor fits Supermicro H14SRV-HLN4F motherboard

Targeted upgrade for Supermicro H14SRV-HLN4F

This 192GB kit supplies four 48GB DDR5 5600 ECC UDIMM modules built to the exact specifications of the Supermicro H14SRV-HLN4F motherboard. The 288-pin unbuffered design matches the board's required form factor and population rules. Error-correcting code protects data integrity by detecting and correcting single-bit errors during operation. The modules operate at 1.1V with CL46 latency and 2Rx8 organisation.

Suited for memory expansion on validated hardware

This kit suits administrators expanding a Supermicro H14SRV-HLN4F system to its full supported capacity with guaranteed compatibility. Builders using a different motherboard, a registered DIMM platform, or a SODIMM-only chassis cannot use these modules. Systems requiring registered memory or a non-ECC configuration should look elsewhere. The unbuffered ECC design is specific to this platform's memory controller.

DDR5 5600 speed with CL46 timing

The decisive specification is the DDR5 5600 (PC5-44800) rating combined with CL46 latency at 1.1V. This exact speed and timing profile is what the Supermicro H14SRV-HLN4F memory controller expects for stable operation at rated frequency. Deviating from this specification risks downclocking, instability, or failure to POST. Verify your manual confirms support for 48GB 2Rx8 unbuffered ECC UDIMMs before installation.

Pluspunten

  • 192 GB capacity across four 48 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • ECC unbuffered UDIMM corrects single-bit errors automatically
  • 1 V operation matches the board's voltage requirement
  • 288-pin 2Rx8 form factor fits Supermicro H14SRV-HLN4F motherboard

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I choose between the different capacities available for this Supermicro H14SRV-HLN4F memory kit?

This kit provides 192GB total capacity across four 48GB modules, filling all four DIMM slots on your Supermicro H14SRV-HLN4F motherboard for maximum supported memory.

What does the DDR5 5600 speed rating actually deliver when installed in my Supermicro H14SRV-HLN4F system?

The modules run at 5600 MT/s with CL46 latency at 1.1V, delivering the exact bandwidth and timing the motherboard's memory controller expects for stable operation at rated specifications.

Will the 288-pin UDIMM ECC interface work correctly with my Supermicro H14SRV-HLN4F motherboard?

Yes, this 288-pin Unbuffered ECC UDIMM kit matches the required form factor and ECC functionality for the Supermicro H14SRV-HLN4F, ensuring proper fit and error-correction support.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.