Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Six green DDR4 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR4 2933 CL21 2Rx8 ECC RDIMM Dell Precision 5820 memory upgrade

SKU CH-E46K-TYK7N

192 GB DDR4 ECC registered kit with six 32 GB modules at 2933 MHz CL21 for Dell Precision 5820

  • Capacity192GB (6 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 192 GB total capacity across six 32 GB modules
  • DDR4 2933 speed rated at PC4-23400 bandwidth
  • ECC registered RDIMM design protects data integrity
  • 2 V operation reduces power draw under load
  • Validated for Dell Precision 5820 workstation compatibility

Dell Precision 5820 192GB DDR4 kit

This 192GB kit contains six 32GB DDR4 RDIMM modules rated at 2933MHz with CL21 latency. The registered ECC design operates at 1.2V and uses 2Rx8 organisation across 288 pins. It is built for the Dell Precision 5820 tower workstation where registered memory is required.

Who this suits and who it does not

The kit suits IT professionals upgrading a Precision 5820 to its maximum registered ECC capacity for virtualisation or large datasets. It is not for systems that accept only unbuffered non-ECC UDIMMs, nor for boards limited to lower densities or speeds.

Deciding specification — registered ECC RDIMM

The single specification that decides fit is the registered ECC RDIMM form factor; the Precision 5820 memory controller requires registered modules with error correction, so unbuffered or non-ECC alternatives will not function.

Pluspunten

  • 192 GB total capacity across six 32 GB modules
  • DDR4 2933 speed rated at PC4-23400 bandwidth
  • ECC registered RDIMM design protects data integrity
  • 2 V operation reduces power draw under load
  • Validated for Dell Precision 5820 workstation compatibility

Specificaties

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-328K6
Capacity192GB (6 x 32GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content192GB (6X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Vragen over dit artikel

Will these 288-pin DDR4 RDIMM modules fit the Dell Precision 5820 tower workstation?

Yes, the kit is built specifically for the Dell Precision 5820 and uses the 288-pin DDR4 RDIMM form factor that the workstation's memory slots accept.

What is the correct installation order for the six 32 GB modules in the 5820's memory channels?

Populate the slots following the Dell Precision 5820 service manual's channel sequence; the common mistake is skipping a required slot or mixing ranks, which prevents the system from recognising the full 192 GB capacity.

Do the Samsung, Micron or Hynix chips on these ECC registered DIMMs need any firmware updates or periodic re-testing?

No firmware updates are required for the memory chips; the modules are stress-tested before shipping and ECC error correction handles runtime faults, so no scheduled re-testing is needed.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.