Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Six green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 192GB 6x32GB DDR5 6400 CL52 1.1V 2Rx8 ECC RDIMM memory upgrade for Supermicro H13SST-G

SKU CH-Z893-RRV46

Six 32 GB DDR5 6400 CL52 registered ECC RDIMMs add 192 GB at 1.1 V for Supermicro H13SST-G servers

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 192 GB kit lets you fully populate six slots
  • DDR5-6400 CL52 matches the board's rated speed and timing
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 10 V standard voltage keeps power draw within spec
  • 288-pin RDIMM form factor fits the H13SST-G memory sockets

Exact-match DDR5 server upgrade

This 192GB kit contains six 32GB DDR5 6400 RDIMMs rated at CL52 and 1.1V. The modules are registered ECC with a 2Rx8 organisation and use the 288-pin form factor required by the Supermicro H13SST-G motherboard. Major OEM Samsung, Micron or Hynix chips are used throughout.

Suited for fully populated H13SST-G builds

Administrators filling every DIMM slot on the H13SST-G will get the registered buffering and ECC protection the platform expects. Buyers who need a UDIMM or SODIMM form factor, non-ECC memory or a different voltage should look at other products because this kit only matches the registered DDR5 specification listed above.

Fits the H13SST-G memory population rules

The kit matches the board's 288-pin RDIMM requirement and supplies the exact rank, voltage and timing the memory controller expects. Consult the motherboard manual for approved population order and maximum supported capacity before installation to ensure full recognition at rated speed.

Pluspunten

  • 192 GB kit lets you fully populate six slots
  • DDR5-6400 CL52 matches the board's rated speed and timing
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 10 V standard voltage keeps power draw within spec
  • 288-pin RDIMM form factor fits the H13SST-G memory sockets

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Vragen over dit artikel

Does the Supermicro H13SST-G motherboard need a specific DIMM population order for this 6-module 192GB kit?

The motherboard manual defines the supported capacities and the approved DIMM population order; follow that guide when installing all six 32GB RDIMMs.

Will these registered ECC RDIMMs work in a board that only accepts unbuffered UDIMMs?

No, the kit uses the 288-pin Registered (RDIMM) form factor required by the H13SST-G; it will not fit or function in a UDIMM-only slot.

How can I confirm the kit is running at DDR5 6400 CL52 after installation?

Check the BIOS memory information or a hardware utility — it should report 6400 MT/s, CL52 latency, 1.1V voltage and the full 192GB capacity.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.