BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00277195BTC
Op voorraad
NEMIX RAM
NEMIX RAM 1TB (8x128GB) DDR5 4800 CL40 1.1V 4Rx4 ECC RDIMM SuperMicro 211SE 31D 31A X31SEED-F
1 TB DDR5 4800 ECC registered server kit in eight 128 GB modules at CL40 1.1 V for SuperMicro 211SE 31D 31A X31SEED-F
- Capacity1TB (8 x 128GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 1 TB total capacity from eight 128 GB modules
- DDR5 4800 speed with CL40 latency for server workloads
- ECC registered design protects data integrity under load
- 1 V operation reduces power draw in dense configurations
- Validated for SuperMicro 211SE 31D 31A X31SEED-F systems
1TB DDR5-4800 ECC RDIMM kit
This 1 TB kit contains eight 128 GB DDR5 registered DIMMs running at 4800 MT/s with CL40 latency and 1.1 V operation. It is built for Supermicro IoT SuperServer platforms including the SYS-211SE-31D, SYS-211SE-31A and X31SEED-F. ECC and 4Rx4 organisation provide error correction and high density for memory-intensive server workloads.
Suited for Supermicro DDR5 servers needing maximum
The kit targets administrators upgrading compatible Supermicro systems to the full 1 TB supported by eight DIMM slots. It is not for desktop PCs, laptops or workstations that accept only unbuffered UDIMMs. Buyers who need non-ECC memory, lower voltages, different form factors or smaller capacities should look at other memory lines.
Registered ECC with 4Rx4 organisation
Registered signalling and on-die ECC protect data integrity in mission-critical environments. The 4Rx4 rank structure delivers the highest module density available in the DDR5 RDIMM standard. Systems that require unbuffered memory or cannot address 4Rx4 modules will not support this kit.
Pluspunten
- 1 TB total capacity from eight 128 GB modules
- DDR5 4800 speed with CL40 latency for server workloads
- ECC registered design protects data integrity under load
- 1 V operation reduces power draw in dense configurations
- Validated for SuperMicro 211SE 31D 31A X31SEED-F systems
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K8 |
| Capacity | 1TB (8 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 1TB (8X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Vragen over dit artikel
How much power does the 1TB DDR5 4800 kit draw at 1.10V under sustained load?
Each 128GB module runs at 1.10V, the standard DDR5 voltage, so the eight-module kit draws proportionally more power than smaller kits but stays within the DDR5 1.10V specification for registered DIMMs.
What must the SuperMicro server already have to accept this 8x128GB RDIMM kit?
The server needs 288-pin DDR5 RDIMM slots, support for 4Rx4 registered ECC modules, and a qualified memory configuration that allows 1TB total capacity across eight populated slots.
Will the CL40 4800 modules run stably in a SuperMicro 211SE that currently uses slower DDR5?
The kit is validated for SuperMicro 211SE, 31D, 31A and X31SEED-F systems; the motherboard will negotiate the highest common speed, so slower installed DDR5 simply causes all channels to operate at that lower rate.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00279774BTC
Op voorraad
