Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green 288-pin DDR5 RDIMM modules, no heat spreaders, 256GB kit

NEMIX RAM

NEMIX RAM 256GB (2×128GB) DDR5 4800 CL40 1.1V ECC Registered RDIMM Supermicro H14SSL-N

SKU CH-JKFY-PX3SN

256 GB kit of two 128 GB DDR5-4800 registered ECC RDIMMs running at 1.1 V CL40, validated for the Supermicro H14SSL-N motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Nog 24 configuraties tonen
  • 256 GB total capacity from two 128 GB modules enables maximum server density
  • DDR5-4800 speed with CL40 timing delivers rated bandwidth for heavy workloads
  • Registered ECC design corrects single-bit errors and supports full-slot population
  • 10 V operation matches platform spec for stable, low-power performance
  • Verified compatibility with Supermicro H14SSL-N motherboard ensures correct fit and recognition

System-specific DDR5 memory kit

This 256 GB kit contains two 128 GB DDR5 RDIMMs built for the Supermicro H14SSL-N motherboard. It delivers registered ECC memory in the exact 288-pin form factor the board requires. Server administrators and integrators can populate two slots with matched modules that the firmware will recognise at full capacity.

Registered ECC with 2Rx4 organisation

The modules run at DDR5 4800 (PC5-38400) with CL40 timing at 1.1 V. Registered buffering and 2Rx4 rank organisation let the memory controller drive both DIMMs at rated speed while ECC corrects single-bit errors on the fly. This combination is the single specification that determines whether the kit will initialise correctly on the target platform.

Matched dual-module kit

The package supplies two 128 GB RDIMMs in a single kit so both modules share the same rank, voltage and timing profile. No additional accessories, cables or software are included. Buyers who need a different capacity, a UDIMM form factor or non-ECC memory should look elsewhere.

Pluspunten

  • 256 GB total capacity from two 128 GB modules enables maximum server density
  • DDR5-4800 speed with CL40 timing delivers rated bandwidth for heavy workloads
  • Registered ECC design corrects single-bit errors and supports full-slot population
  • 10 V operation matches platform spec for stable, low-power performance
  • Verified compatibility with Supermicro H14SSL-N motherboard ensures correct fit and recognition

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What does the 4800 MT/s speed mean once the kit is installed in a Supermicro H14SSL-N?

The modules run at DDR5-4800 (PC5-38400) with CL40 latency at 1.1 V, delivering the rated throughput the board's memory controller expects when all slots are populated.

How does the 288-pin RDIMM interface and registered design affect what the system can use?

The 288-pin RDIMM form factor with registered buffering is required by the H14SSL-N; it allows full-capacity operation across all populated slots while ECC corrects single-bit errors on the fly.

What physical clearance and slot layout does this 2×128 GB kit need on the motherboard?

Each 288-pin RDIMM fits a standard DDR5 DIMM slot with no heat spreader, so it clears typical CPU coolers; follow the H14SSL-N manual for the approved population order.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.