Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Eight green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM 256GB (8x32GB) DDR5 5600MHz PC5-44800 CL46 2Rx8 1.1V ECC Registered RDIMM Kit for GIGABYTE MZ73-LM1

SKU CH-3E9H-754CT

Eight 32 GB DDR5 registered ECC modules at 5600 MHz CL46 1.1 V, validated for the GIGABYTE MZ73-LM1 motherboard

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Nog 24 configuraties tonen
  • 256GB total capacity lets you maximise server memory density with eight 32GB modules
  • DDR5 5600MHz PC5-44800 speed matches the board's rated frequency for full-performance operation
  • CL46 CAS latency and 1.1V voltage meet the exact timing and power specs the memory controller expects
  • ECC Registered RDIMM architecture corrects single-bit errors on the fly while buffering signals for stable full-population operation
  • Verified fitment for the GIGABYTE MZ73-LM1 motherboard ensures the 288-pin RDIMM form factor and population rules are satisfied

Exact-match upgrade kit

This 256GB kit delivers eight 32GB DDR5 5600 RDIMMs tuned to CL46 at 1.1V. It is built for the GIGABYTE MZ73-LM1 motherboard and matches the board's required 2Rx8 registered ECC specification. The modules populate every slot at full capacity without manual tuning.

Sustained enterprise stability

Registered architecture buffers the command bus so all eight slots run fully populated at rated speed under continuous load. On-die ECC corrects single-bit errors in real time preventing silent data corruption during long compute runs. The 1.1V operating voltage keeps power draw predictable across extended duty cycles.

Build and daily implications

Bare 288-pin RDIMMs without heat spreaders rely on server chassis airflow for cooling. The registered form factor is mandatory for this platform and will not fit UDIMM or SODIMM slots. Buyers needing non-ECC unbuffered memory or consumer desktop compatibility should look elsewhere.

Pluspunten

  • 256GB total capacity lets you maximise server memory density with eight 32GB modules
  • DDR5 5600MHz PC5-44800 speed matches the board's rated frequency for full-performance operation
  • CL46 CAS latency and 1.1V voltage meet the exact timing and power specs the memory controller expects
  • ECC Registered RDIMM architecture corrects single-bit errors on the fly while buffering signals for stable full-population operation
  • Verified fitment for the GIGABYTE MZ73-LM1 motherboard ensures the 288-pin RDIMM form factor and population rules are satisfied

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does the 1.1V 5600MHz kit run hotter or louder than lower-speed memory when the server runs all day?

The modules operate at the standard DDR5 voltage of 1.1V with no heat spreader, so thermal output matches the board's design envelope and there are no moving parts to create noise.

What motherboard and slot type must I already have for this 288-pin RDIMM kit to work?

You need a GIGABYTE MZ73-LM1 motherboard with DDR5 RDIMM slots that accept 288-pin registered ECC modules.

Can I mix these 2Rx8 CL46 modules with older DDR5 sticks already in the server?

Mixing ranks, speeds or latencies is not recommended; the board expects identical 2Rx8 CL46 modules in every populated slot for stable registered ECC operation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.