Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR2 memory module with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 2GB DDR2 667 PC2-5300 desktop RAM

SKU CH-5TG7-9426D

A 2 GB DDR2 desktop module running at 667 MHz with CL5 latency and 1.8 V operation

  • Capacity2GB
  • Type240-Pin DDR2 UDIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo

Capacity 2GB

  • 2GB capacity expands multitasking headroom on legacy desktops
  • DDR2 667 speed matches PC2-5300 motherboard specifications
  • CL5 latency at 1.80V keeps timing stable
  • Unbuffered non-ECC design fits standard 240-pin DDR2 slots
  • Major OEM chips from Samsung Micron Hynix ensure module reliability

NEMIX RAM DDR2 2GB PC2-5300 Module

This NEMIX RAM module is a 2GB DDR2 desktop DIMM built for older PC upgrades. It runs at 667MHz with CL5 latency and uses the standard 240-pin UDIMM form factor. The stick operates at 1.80V and carries no heat spreader.

Suits legacy DDR2 boards needing non-ECC

It fits motherboards that accept 240-pin DDR2 667 PC2-5300 modules without ECC or buffering. Systems requiring registered DIMMs, ECC support, or newer DDR5 memory cannot use this part. The single 2GB density limits total capacity on boards with few slots.

Single rank x8 chip organisation

The module uses a 2Rx8 configuration built from major OEM Samsung, Micron, or Hynix chips. This rank layout determines compatibility with chipsets that restrict rank count per channel. Verify the motherboard manual for supported rank populations before purchase.

Pluspunten

  • 2GB capacity expands multitasking headroom on legacy desktops
  • DDR2 667 speed matches PC2-5300 motherboard specifications
  • CL5 latency at 1.80V keeps timing stable
  • Unbuffered non-ECC design fits standard 240-pin DDR2 slots
  • Major OEM chips from Samsung Micron Hynix ensure module reliability

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM DDR2 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR2 Desktop PC Memory Solutions
Part NumberMD5300-228K1
Capacity2GB
Type240-Pin DDR2 UDIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR2 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does my motherboard need a 240-pin DDR2 slot to install this module?

Yes, this is a 240-pin DDR2 UDIMM designed for desktop boards that accept PC2-5300 memory at 1.80V.

Will this 667MHz stick run stably in a system that currently uses slower DDR2 modules?

The module will downclock to match the slowest installed speed, but mixing CAS latencies or voltages can cause instability.

How can I confirm the memory is recognised at the correct 667MHz speed after installation?

Check the BIOS memory information screen or a system utility such as CPU-Z; it should report DDR2-667 (PC2-5300) at CL5.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.