NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 2666 ECC Unbuffered UDIMM CL19 1.2V 288-pin Synology RS2821RP+
ECC unbuffered DDR4 kit adds 32 GB across two 16 GB modules at 2666 MT/s with CL19 timing for the Synology RS2821RP+ NAS
- Capacity32GB (2 x 16GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection guards data integrity with error-correcting DDR4 technology
- 32 GB kit expands NAS capacity using two 16 GB modules
- 2666 MHz speed matches Synology RS2821RP+ specifications for stable operation
- 2 V low voltage reduces power draw and heat in rackmount enclosures
- 288-pin UDIMM form factor fits directly into compatible Synology memory slots
32GB DDR4 ECC Kit for Synology RS2821RP+
This 32GB kit contains two 16GB DDR4 2666 modules built for the Synology RackStation RS2821RP+. ECC unbuffered UDIMM design adds error correction for data integrity in NAS workloads. CL19 latency and 1.2V operation match the platform specifications. The 288-pin form factor fits the system memory slots directly.
Replaces lower-capacity or non-ECC modules
Upgrading from smaller DIMMs or standard memory adds both capacity and error correction in one step. The jump is worth it when the NAS runs virtual machines, containers or ZFS pools that benefit from extra headroom and corrected single-bit errors. Existing 16GB or 8GB sticks can be removed to make room for this matched pair.
Fits the RS2821RP+ memory slots
Two UDIMM slots accept this 2Rx8 kit without adapters or risers. No heat spreader means clearance stays minimal inside the rack chassis. The kit frees the installer from mixing speeds or ranks because both modules are validated together. Remaining expansion depends on the number of slots the mainboard provides.
Pluspunten
- ECC protection guards data integrity with error-correcting DDR4 technology
- 32 GB kit expands NAS capacity using two 16 GB modules
- 2666 MHz speed matches Synology RS2821RP+ specifications for stable operation
- 2 V low voltage reduces power draw and heat in rackmount enclosures
- 288-pin UDIMM form factor fits directly into compatible Synology memory slots
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC Unbuffered UDIMM |
| Part Number | ME21300-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN ECC Unbuffered UDIMM KIT |
Vragen over dit artikel
Does the 288-pin DDR4 UDIMM fit the Synology RS2821RP+ memory slots?
Yes, the 288-pin DDR4 ECC UDIMM form factor matches the memory slots on the Synology RS2821RP+ NAS.
What is the correct orientation step when installing the 2Rx8 modules?
Align the notch on each 288-pin module with the slot key, then press firmly until the retention clips click on both sides.
Will the 1.2V DDR4 2666 modules need any firmware update after installation?
No firmware update is required; the NAS detects the 32GB kit at 2666MHz automatically on boot.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
US$ 104,99
0.00133607BTC
Op voorraad
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
US$ 7,99
0.00010168BTC
Op voorraad