Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR4 SODIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 2Rx8 1.2V 260-Pin SODIMM for POSIFLEX XT-8315

SKU CH-SG4N-B4800

A 32 GB DDR4 SODIMM kit built for the POSIFLEX XT-8315 terminal, running at 3200 MT/s with CL22 latency and 1.2 V power

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit expands POS terminal multitasking capacity
  • DDR4 3200 speed matches system memory bus
  • CL22 latency keeps timing stable under load
  • 2 V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX XT-8315 slot

Compatibility

This kit is built for the POSIFLEX XT-8315 terminal. It provides 32GB of DDR4 3200 memory in two 16GB SODIMM modules. The 260-pin unbuffered design matches the system's slot requirements exactly.

Upgrade path

It replaces lower-capacity or slower DDR4 SODIMMs in the XT-8315. The jump is worthwhile when the terminal runs multiple POS applications simultaneously and needs more headroom.

Sustained operation

Modules use major OEM chips tested under load for stability. The 1.20V voltage and CL22 latency support continuous duty in fanless environments without thermal throttling.

Pluspunten

  • 32 GB kit expands POS terminal multitasking capacity
  • DDR4 3200 speed matches system memory bus
  • CL22 latency keeps timing stable under load
  • 2 V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX XT-8315 slot

Specificaties

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

Vragen over dit artikel

Will these 260-Pin SODIMM modules fit the POSIFLEX XT-8315?

Yes, the 260-Pin DDR4 SODIMM form factor matches the memory slots in the POSIFLEX XT-8315 terminal.

What is the correct way to seat the 2Rx8 modules during installation?

Insert each module at an angle until the gold contacts are fully hidden, then press down firmly until the side clips click into place.

When should I consider replacing the 32GB DDR4 3200 kit?

Replace the kit if the terminal fails to POST, shows memory errors during diagnostics, or becomes unstable under sustained POS workloads.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.