BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00278456BTC
Op voorraad
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 2Rx8 SODIMM POSIFLEX RT-6015Q-G2 memory upgrade
A 32 GB kit of two 16 GB DDR4 3200 CL22 SODIMM modules for POSIFLEX RT-6015Q-G2 terminals
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit adds headroom for multi-tasking POS workloads
- Dual 16 GB modules populate both slots for balanced throughput
- DDR4 3200 speed matches the terminal's native memory bus
- CL22 latency at 1.2 V keeps power draw low
- 260-pin SODIMM form factor fits the RT-6015Q-G2 chassis directly
POSIFLEX RT-6015Q-G2 memory kit
This 32 GB DDR4 SODIMM kit is built specifically for the POSIFLEX RT-6015Q-G2 stylish slim terminal. It contains two 16 GB modules that install directly into the system without additional configuration. The kit targets businesses upgrading point-of-sale or kiosk hardware that requires validated compatibility.
32 GB capacity with DDR4 3200 speed
The two 16 GB modules run at 3200 MHz (PC4-25600) with CL22 latency at 1.20 V. Unbuffered non-ECC operation suits the terminal’s consumer-class memory controller. The 2Rx8 organisation provides standard density for the platform. Systems needing more than 32 GB or registered ECC memory cannot use this kit.
Ready-to-install dual-module package
The box delivers a matched pair of 260-pin SODIMMs so both channels populate at once. No heat spreaders are included, keeping the low-profile form factor required by the slim chassis. No software or drivers are bundled; the upgrade is purely hardware.
Pluspunten
- 32 GB kit adds headroom for multi-tasking POS workloads
- Dual 16 GB modules populate both slots for balanced throughput
- DDR4 3200 speed matches the terminal's native memory bus
- CL22 latency at 1.2 V keeps power draw low
- 260-pin SODIMM form factor fits the RT-6015Q-G2 chassis directly
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT |
Vragen over dit artikel
Will the 3200 MHz CL22 DDR4 SODIMMs run without issues alongside any existing DDR4 modules I keep in the POSIFLEX RT-6015Q-G2?
The kit is validated for the POSIFLEX RT-6015Q-G2 terminal. When mixed with other DDR4 SODIMMs the system will operate at the speed of the slowest installed module, so 3200 MHz modules will down-clock automatically to match older sticks.
How can I verify the kit is running at 3200 MHz CL22 after installation?
Open Task Manager or a system-information utility and confirm the memory speed reads 3200 MHz with CAS latency 22. The BIOS POST screen also shows the detected frequency and timings for each 260-pin SODIMM.
What is included in the package and do I need any extra parts?
The box contains two 16 GB 2Rx8 260-pin DDR4 SODIMMs (32 GB total). No heat spreader, tools, cables or additional hardware are supplied or required for installation.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00281046BTC
Op voorraad
