Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR5 UDIMM sticks, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 4800 PC5-38400 CL40 1.1V 288-pin UDIMM memory upgrade

SKU CH-0K46-S8ASB

A 32 GB dual-channel DDR5 kit running at 4800 MT/s with CL40 latency for Supermicro desktop workstations

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB 2X16GB

  • 32 GB kit expands desktop capacity
  • DDR5 4800 MT/s delivers high bandwidth
  • CL40 timing at 1.1 V for efficient operation
  • 288-pin UDIMM fits compatible Supermicro boards
  • Samsung, Micron or Hynix chips ensure reliability

Compatible Supermicro DDR5 kit

This 32 GB kit contains two 16 GB DDR5 4800 UDIMM modules built for Supermicro desktop and workstation systems. It targets administrators and builders who need validated memory for the SYS-531AD-I and C9Z790-CG platforms.

Standard voltage and unbuffered design

Each module runs at 1.10 V with CL40 latency and no heat spreader. The unbuffered, non-ECC layout keeps power draw predictable and acoustic impact minimal inside typical chassis airflow.

288-pin UDIMM form factor

The dual-rank 1Rx8 sticks install directly into standard DDR5 slots without registration or ECC overhead. Buyers who need registered DIMMs, ECC protection, or capacities beyond 32 GB should select a different configuration.

Pluspunten

  • 32 GB kit expands desktop capacity
  • DDR5 4800 MT/s delivers high bandwidth
  • CL40 timing at 1.1 V for efficient operation
  • 288-pin UDIMM fits compatible Supermicro boards
  • Samsung, Micron or Hynix chips ensure reliability

Specificaties

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I install the 288-pin DDR5 UDIMM modules in the SuperMicro SYS-531AD-I and what step is often missed?

Align the notch on each 1Rx8 module with the slot key, press firmly until both side clips click, then enable XMP or manually set 4800 MT/s and CL40 in BIOS — the step most people miss is confirming the speed and latency after boot.

What maintenance or replacement will the 32GB kit need over time?

No moving parts or heat spreader mean no routine maintenance; if a module fails the lifetime replacement warranty covers it, otherwise the kit runs until a platform upgrade requires different memory.

What limit appears first when the 1.1V CL40 modules run sustained workloads?

The CL40 latency at 4800 MT/s is the primary bottleneck; bandwidth caps at PC5-38400, so latency-sensitive tasks hit that ceiling before thermal or voltage limits become an issue.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.