Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR4 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2933 ECC RDIMM CL21 1.2V 288-pin memory upgrade

SKU CH-1Q6Y-109Q5

A 32 GB DDR4 ECC registered server memory kit running at 2933 MHz with CL21 latency and 1.2 V operation

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 32GB 4X8GB

  • ECC protection prevents data corruption in critical workloads
  • 32GB kit expands server capacity for demanding applications
  • DDR4 2933 speed matches EPYC platform specifications
  • Registered design stabilises signal integrity on multi-DIMM boards
  • 20V operation reduces power draw per module

Compatible ECC RDIMM kit for ASRock EPYC boards

This 32 GB kit contains four 8 GB registered DDR4 modules rated at 2933 MT/s with CL21 latency. Each stick is a 1Rx8 ECC RDIMM built for ASRock Rack ROMED8-2T motherboards running AMD EPYC processors. The modules operate at 1.20 V and use major OEM chips from Samsung, Micron or Hynix.

Passive thermals and registered power profile

Without heat spreaders the modules rely on chassis airflow, keeping acoustic output to zero. Registered buffering places the electrical load on the module rather than the CPU memory controller, which steadies power draw across all four slots at the rated 1.20 V. ECC circuitry adds single-bit correction without measurable thermal penalty.

Four-slot population frees remaining channels

Populating four 288-pin slots with this kit leaves additional memory channels open for future expansion on supported platforms. The registered design reduces signal loading on the memory bus, helping stability when more modules are added later. Builders who need higher single-module densities or non-registered memory should look elsewhere.

Pluspunten

  • ECC protection prevents data corruption in critical workloads
  • 32GB kit expands server capacity for demanding applications
  • DDR4 2933 speed matches EPYC platform specifications
  • Registered design stabilises signal integrity on multi-DIMM boards
  • 20V operation reduces power draw per module

Specificaties

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-818K4
Capacity32GB (4 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (4X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I install the 288-pin DDR4 RDIMM modules in the ASRock Rack ROMED8-2T, and what step is often missed?

Align the notch on each 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that all four 8 GB sticks are detected at 2933 MT/s; the step often missed is populating the correct channel slots per the motherboard manual for quad-channel operation.

What maintenance or replacement will the ECC RDIMM kit need over time?

The modules have no heat spreaders and no moving parts, so no routine maintenance is required; if a stick fails the lifetime replacement warranty covers it, otherwise they run until the server is decommissioned.

What limit appears first when the 1Rx8 registered DIMMs run sustained workloads at 1.2 V?

The CL21 latency at 2933 MT/s sets the throughput ceiling; under continuous load the memory controller hits that timing boundary before voltage or thermal limits become a factor.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.