Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR4 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2933MHz ECC RDIMM Dell Precision 7820 memory upgrade

SKU CH-VK20-H0QZF

A 32 GB kit of four 8 GB DDR4 2933 MHz ECC registered DIMMs validated for the Dell Precision 7820 workstation

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity across four 8 GB modules for expanded multitasking
  • DDR4 2933 MHz speed with PC4-23400 bandwidth for responsive workloads
  • ECC registered RDIMM design detects and corrects data errors
  • 2 V operation at CL21 latency for stable server performance
  • 288-pin DDR4 form factor built for Dell Precision 7820 compatibility

Dell Precision 7820 Memory Kit

This 32 GB kit contains four 8 GB DDR4 ECC RDIMM modules built for the Dell Precision 7820 tower workstation. The registered design adds stability for mission-critical workloads. Modules run at 2933 MHz with CL21 latency at 1.20 V. No heat spreaders are fitted.

Suited for ECC Workstations

IT teams expanding a Precision 7820 for virtualization, rendering or database tasks will match the factory memory specification. Builders who need non-ECC UDIMMs, higher frequencies or larger single-module capacities should look elsewhere.

Sustained Load Stability

Registered buffering and on-die ECC correction keep data integrity intact during long compile jobs or VM clusters. The 1Rx8 organisation maintains consistent bandwidth without throttling under continuous multi-threaded pressure.

Pluspunten

  • 32 GB capacity across four 8 GB modules for expanded multitasking
  • DDR4 2933 MHz speed with PC4-23400 bandwidth for responsive workloads
  • ECC registered RDIMM design detects and corrects data errors
  • 2 V operation at CL21 latency for stable server performance
  • 288-pin DDR4 form factor built for Dell Precision 7820 compatibility

Specificaties

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-818K4
Capacity32GB (4 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (4X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Vragen over dit artikel

Does this 32 GB kit require a Dell Precision 7820 workstation with DDR4 ECC RDIMM slots to operate?

Yes, the modules are 288-pin DDR4 ECC registered DIMMs built for the Dell Precision 7820 and need a system that accepts PC4-23400 RDIMMs.

Can I mix these 2933 MHz CL21 1Rx8 modules with slower DDR4 ECC RDIMMs already in the Precision 7820?

The workstation will run all installed memory at the speed and timing of the slowest modules, so mixing is possible but total bandwidth drops to the lower spec.

How can I confirm the four 8 GB sticks are recognised at 2933 MHz with ECC active after installation?

Check the system BIOS or UEFI memory information screen; it should show 32 GB total, 2933 MT/s, CL21, registered ECC mode enabled.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.