BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00278214BTC
Op voorraad
NEMIX RAM
NEMIX RAM 32GB (4x8GB) DDR4 3200 CL22 288-Pin UDIMM THINKMATE GPX-WS-540X1 memory upgrade
32 GB DDR4 kit (four 8 GB modules) at 3200 MT/s CL22 for Thinkmate GPX-WS-540X1 workstations
- Capacity32GB (4 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit expands workstation memory capacity
- DDR4 3200 speed matches system requirements
- CL22 latency supports stable operation
- 2 V modules reduce power consumption
- 288-pin UDIMM form factor fits Thinkmate GPX-WS-540X1
ThinkMate GPX-WS-540X1 DDR4 Kit
This NEMIX RAM kit supplies 32 GB of DDR4 3200 memory in four matched 8 GB modules built for the ThinkMate GPX-WS-540X1 workstation. Each stick is a 288-pin unbuffered UDIMM running at 1.2 V with CL22 latency. The modules use major OEM chips from Samsung, Micron or Hynix and carry no heat spreader. They are tested for stability under load in the target platform.
Suited for compatible workstations needing 32 GB
Builders upgrading a ThinkMate GPX-WS-540X1 that accepts non-ECC unbuffered DDR4 UDIMMs can install this kit directly. Systems that require registered or ECC memory, or platforms limited to lower speeds or voltages, cannot use these modules. Buyers needing capacities beyond 32 GB must look for a different configuration.
32 GB DDR4 3200 CL22 288-pin UDIMM
The single specification that decides fit is the combination of DDR4 3200 speed, CL22 timing, 1.2 V operation, non-ECC unbuffered design and 288-pin UDIMM form factor in a 32 GB (4×8 GB) kit. If the workstation’s memory controller demands ECC, registered modules or a different pin count, this kit will not work.
Pluspunten
- 32 GB kit expands workstation memory capacity
- DDR4 3200 speed matches system requirements
- CL22 latency supports stable operation
- 2 V modules reduce power consumption
- 288-pin UDIMM form factor fits Thinkmate GPX-WS-540X1
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K4 |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (4X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Vragen over dit artikel
Does the CL22 latency limit bandwidth under sustained loads?
CL22 is the rated CAS latency at DDR4 3200; sustained throughput depends on the workstation memory controller and workload.
How much heat and power do four 1.20 V modules produce all day?
Each 8 GB UDIMM runs at 1.20 V without a heat spreader; total power scales with the number of active ranks in the ThinkMate GPX-WS-540X1.
What must the workstation already have to accept this 4 x 8 GB kit?
Four free 288-pin DDR4 UDIMM slots and a motherboard qualified for non-ECC unbuffered PC4-25600 memory.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00280802BTC
Op voorraad
