Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR4 UDIMM sticks in a clear tray

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 3200 CL22 UDIMM for THINKMATE XF6-14X1 Workstation memory upgrade

SKU CH-X687-NHQ3J

Four 8 GB DDR4-3200 UDIMM modules at CL22 and 1.20 V, validated for THINKMATE XF6-14X1 workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity expands workstation memory headroom
  • 3200 MHz DDR4 speed supports demanding workloads
  • CL22 latency delivers responsive data access
  • 2 V operation reduces power consumption
  • 288-pin UDIMM form factor fits ThinkMate XF6-14X1

Compatible DDR4 kit for THINKMATE XF6-14X1

This 32GB kit contains four 8GB DDR4 UDIMM modules built for the THINKMATE XF6-14X1 Workstation. It uses 1Rx8 Non-ECC unbuffered chips from major OEM suppliers. The kit installs directly into standard 288-pin desktop memory slots.

Standard voltage and latency profile

Each module runs at 1.20V with a CAS latency of CL22 at DDR4 3200 speed. The unbuffered design draws typical DDR4 power without extra cooling requirements. No heat spreaders are fitted, so airflow in the chassis handles thermal management.

32GB total capacity in four slots

The kit delivers 32GB across four 8GB modules, filling four DIMM slots. Systems needing more than 32GB or a different module count will require a different configuration.

Pluspunten

  • 32 GB capacity expands workstation memory headroom
  • 3200 MHz DDR4 speed supports demanding workloads
  • CL22 latency delivers responsive data access
  • 2 V operation reduces power consumption
  • 288-pin UDIMM form factor fits ThinkMate XF6-14X1

Specificaties

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K4
Capacity32GB (4 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (4X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Vragen over dit artikel

How do I install the four 288-pin DDR4 UDIMM modules in the THINKMATE XF6-14X1, and what step is often missed?

Power down, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify all four 8 GB sticks are recognised in BIOS.

What maintenance or replacement will this 32 GB kit need over its service life?

No scheduled maintenance is required; the modules have no heat spreaders and carry a lifetime replacement warranty, so only a failed stick would need swapping.

What limit appears first when the CL22 1Rx8 modules run sustained workloads at 3200 MT/s?

The CAS latency of 22 cycles at 1.20 V sets the timing floor, so latency-bound tasks hit that ceiling before throughput saturates.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.