Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips, gold edge connector, no heat spreader, SODIMM form factor

NEMIX RAM

NEMIX RAM 32GB DDR4 3200 CL22 2Rx8 260-pin SODIMM POSIFLEX ZT-3716E memory upgrade

SKU CH-QKWE-KQF9P

A 32 GB DDR4 3200 CL22 SODIMM module built for the POSIFLEX ZT-3716E terminal

  • Capacity32GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity expands terminal multitasking headroom
  • DDR4 3200 speed matches POSIFLEX ZT-3716E spec
  • CL22 latency keeps data flowing smoothly
  • 2 V operation reduces power draw and heat
  • 260-pin SODIMM fits the kiosk motherboard slot

POSIFLEX ZT-3716E memory upgrade

This 32 GB DDR4 SODIMM is built for the POSIFLEX ZT-3716E Haydn ZT Series point-of-sale terminal. It delivers a single-module capacity increase for systems that need more headroom for transaction workloads. The module targets IT teams maintaining compatible POS hardware.

260-pin DDR4 SODIMM build

The stick uses a standard 260-pin SODIMM edge connector and runs at 1.2 V without a heat spreader. Major-brand Samsung, Micron or Hynix DRAM chips are assembled in a 2Rx8 unbuffered non-ECC layout. Installation follows the terminal’s own service procedure.

Replacing lower-capacity DDR4 SODIMMs

The upgrade replaces smaller DDR4 SODIMMs when the terminal’s workload exceeds the original memory allowance. The jump is worthwhile when multi-tasking or newer POS software pushes the system toward swap usage.

Pluspunten

  • 32 GB capacity expands terminal multitasking headroom
  • DDR4 3200 speed matches POSIFLEX ZT-3716E spec
  • CL22 latency keeps data flowing smoothly
  • 2 V operation reduces power draw and heat
  • 260-pin SODIMM fits the kiosk motherboard slot

Specificaties

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-328K1
Capacity32GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Vragen over dit artikel

What bandwidth does the DDR4 3200 PC4-25600 interface provide for this module?

The DDR4 3200 PC4-25600 interface delivers up to 25 600 MB/s of theoretical bandwidth, which the 32 GB SODIMM uses at CL22 latency and 1.2 V.

What physical slot and form factor are required to install this 260-pin SODIMM?

It fits a standard 260-pin DDR4 SODIMM slot in the POSIFLEX ZT-3716E; the module is unbuffered, non-ECC, 2Rx8 and has no heat spreader.

How is the module installed and which step is often missed?

Power off the terminal, open the memory cover, align the notch on the 260-pin edge connector, insert at an angle and press down until both retention clips click — skipping the click check is the common mistake.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.