NEMIX RAM
NEMIX RAM 32GB DDR5 4800 CL40 1.1V 2Rx8 SODIMM memory upgrade
A 32 GB DDR5 SODIMM running at 4800 MT/s with CL40 latency and 1.1 V operation for Supermicro systems
- Capacity32GB
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB capacity fits demanding server workloads
- DDR5 4800 speed moves data faster than older standards
- Low 1.10 V voltage reduces power draw
- CL40 latency keeps response times tight
- 262-pin SODIMM form factor installs in compatible Supermicro systems
32 GB DDR5 SODIMM for SuperMicro X13SRN-H
This 32 GB DDR5 4800 module is built for the SuperMicro X13SRN-H motherboard. It runs at 1.1 V with CL40 latency and uses a 262-pin SODIMM form factor. The stick is unbuffered, non-ECC and organised as 2Rx8 with major OEM chips.
Suits single-slot upgrades on the listed
It fits administrators expanding memory on the X13SRN-H without ECC or registered requirements. Buyers needing error correction, registered DIMMs, higher capacities per slot or different pin counts should look elsewhere.
Simple SODIMM insertion with standard alignment
The module slots into the SO-DIMM socket at the usual angle until the side clips lock. Common issues include seating the stick unevenly or forgetting to update the system BIOS for full DDR5 4800 operation.
Pluspunten
- 32 GB capacity fits demanding server workloads
- DDR5 4800 speed moves data faster than older standards
- Low 1.10 V voltage reduces power draw
- CL40 latency keeps response times tight
- 262-pin SODIMM form factor installs in compatible Supermicro systems
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-328K1 |
| Capacity | 32GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 262-PIN Non-ECC Unbuffered SODIMM |
Vragen over dit artikel
What motherboard slot does the 262-pin DDR5 SODIMM require?
The module fits a standard DDR5 SODIMM socket on a Supermicro X13SRN-H motherboard.
Will this non-ECC unbuffered DDR5 module work in a system that currently uses registered ECC memory?
No, the board must support non-ECC unbuffered DDR5; mixing registered ECC with this module is not supported.
How can I verify the module runs at the rated 4800 MT/s and CL40 after installation?
Check the memory speed and latency in the BIOS or with a tool such as CPU-Z; they should show DDR5-4800 and CL40.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.



