Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR5 RDIMM module with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 32GB DDR5 6400 CL52 2Rx8 ECC RDIMM Supermicro H14DSG-OD memory upgrade

SKU CH-53XA-AMSQ0

32 GB DDR5 6400 ECC registered RDIMM with CL52 latency and 1.1 V operation, verified for the Supermicro H14DSG-OD motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Exact-match DDR5-6400 CL52 1.1V timing for full-rated speed
  • 2Rx8 registered ECC RDIMM architecture for stable full-population operation
  • Verified fitment with Supermicro H14DSG-OD motherboard 288-pin slot
  • Single-bit error correction prevents silent data corruption in production
  • Lifetime replacement warranty with US-based technical support included

Server Memory Upgrade

This 32GB DDR5 6400 CL52 2Rx8 ECC Registered RDIMM is an exact-match upgrade for the Supermicro H14DSG-OD motherboard. It delivers the precise rank, voltage, and timing the server's memory controller expects for full-capacity recognition and rated-speed operation. The 288-pin Registered form factor matches the board's physical and electrical requirements.

Thermals and Power

Operating at 1.10V, the module runs at standard DDR5 server voltage without a heat spreader. The registered architecture buffers address and command signals, reducing electrical load on the memory controller when every slot is populated. ECC circuitry corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during sustained workloads.

Build Integration

The 288-pin RDIMM fits only motherboards designed for registered ECC memory; it will not work in consumer UDIMM or SODIMM slots. Installation must follow the H14DSG-OD manual's population order to enable all channels at 6400 MT/s. Builders needing non-ECC memory, lower latency timings, or modules with heat spreaders should select a different product.

Pluspunten

  • Exact-match DDR5-6400 CL52 1.1V timing for full-rated speed
  • 2Rx8 registered ECC RDIMM architecture for stable full-population operation
  • Verified fitment with Supermicro H14DSG-OD motherboard 288-pin slot
  • Single-bit error correction prevents silent data corruption in production
  • Lifetime replacement warranty with US-based technical support included

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Vragen over dit artikel

How do I install this 288-pin DDR5 RDIMM in the Supermicro H14DSG-OD and which slot order does the manual require?

Power down the server, open the chassis, and insert the module into the DIMM slots following the population sequence listed in the Supermicro H14DSG-OD manual; the 288-pin keying prevents incorrect orientation.

Will the ECC function or the registered buffer on this 2Rx8 module degrade and need replacement over time?

The ECC logic and registered buffer are integrated into the DRAM and register chips; they do not wear out and have no scheduled replacement interval.

At what point does the CL52 latency at 6400 MT/s become the bottleneck during sustained workloads?

The CAS latency of CL52 at 6400 MT/s sets the minimum access delay; under continuous heavy traffic the memory controller waits for each column strobe, making this timing the first limiting factor.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.