Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Six green 288-pin DDR4 RDIMM modules, no heat spreaders

NEMIX RAM

NEMIX RAM 48GB (6x8GB) DDR4 2933MHz CL21 ECC RDIMM server RAM

SKU CH-28PH-DMQ0P

Six 8 GB DDR4 2933 MHz registered ECC modules deliver 48 GB of 1.2 V server memory with CL21 latency

  • Capacity48GB (6 x 8GB)
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 48GB (6 x 8GB)

  • 8GB
  • 16GB (2 x 8GB)
  • 32GB (4 x 8GB)
  • 48GB (6 x 8GB)
  • 64GB (8 x 8GB)
  • 128GB (16 x 8GB)

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

  • ECC protection guards data integrity in critical workloads
  • 2933 MHz DDR4 speed supports demanding server applications
  • Registered design stabilises signal quality across six modules
  • 2 V operation reduces power draw per module
  • 48 GB total capacity from six 8 GB sticks

48GB DDR4 ECC RDIMM kit

This NEMIX RAM kit supplies 48GB of DDR4 server memory across six 8GB registered DIMMs. It targets administrators upgrading or populating compatible enterprise platforms that require error-correcting registered modules. The matched set simplifies deployment in multi-channel configurations.

Registered ECC at DDR4 2933 CL21

Each module operates at DDR4 2933 (PC4-23400) with CL21 latency and 1.20V voltage. The registered ECC design adds a register between the DRAM and the memory controller while providing single-bit error correction for data integrity. Verify that your motherboard supports registered ECC RDIMMs before purchase.

Six-module matched kit

The package contains six 8GB 288-pin RDIMMs tested together for compatibility. No heat spreaders are fitted, allowing installation in dense server chassis with limited clearance. The matched kit reduces the risk of timing mismatches that can occur when mixing individual modules.

Pluspunten

  • ECC protection guards data integrity in critical workloads
  • 2933 MHz DDR4 speed supports demanding server applications
  • Registered design stabilises signal quality across six modules
  • 2 V operation reduces power draw per module
  • 48 GB total capacity from six 8 GB sticks

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR23400-818K6
Capacity48GB (6 x 8GB)
Type288-Pin DDR4 RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC RDIMM Registered Server Memory Motherboard Compatible

Vragen over dit artikel

What does the 2933MHz speed mean for actual server throughput?

The 2933MHz DDR4 rating (PC4-23400) sets the maximum data rate the memory controller can sustain; real-world throughput depends on the platform's memory-channel count and BIOS configuration.

How does the registered ECC RDIMM interface affect compatibility?

The 288-pin RDIMM module uses a register to buffer address and command signals and includes ECC for error correction; it only works in server or workstation boards that explicitly support registered ECC DDR4.

What physical clearance does the 6-module kit require?

Six standard-height 288-pin DDR4 RDIMMs without heat spreaders occupy six adjacent DIMM slots; verify the motherboard has six free slots and enough vertical clearance for the latches.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.