Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board DDR5 RDIMM memory module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 5600 CL46 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-JQA8-XS7DK

A 48GB DDR5 5600 registered ECC RDIMM built to the exact rank, voltage and timing the Supermicro H14DST-F memory controller expects, so every slot runs fully populated at rated speed

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 48GB

Nog 30 configuraties tonen
  • Exact-match upgrade for Supermicro H14DST-F
  • 48 GB DDR5 5600 CL46 registered ECC RDIMM
  • 2Rx8 organisation at 1.1 V for full-capacity stability
  • Registered buffer offloads controller across every slot
  • Lifetime replacement warranty with US-based technical support

48 GB DDR5 ECC RDIMM for Supermicro H14DST-F

This 48 GB DDR5-5600 registered ECC module is built for the Supermicro H14DST-F motherboard. It delivers 2Rx8 organisation at 1.1 V with CL46 latency. The registered design lets the board run every slot at full rated speed.

Check board manual for population rules

Verify the H14DST-F manual for approved capacities per channel and the required DIMM installation order before ordering. The board accepts only 288-pin RDIMM modules, so UDIMM or SODIMM parts will not fit or function.

Fits server builds needing registered ECC

The module requires a motherboard wired for DDR5 registered memory with ECC support. It frees the memory controller from electrical load when all slots are populated, enabling stable operation at the rated 5600 MT/s data rate.

Pluspunten

  • Exact-match upgrade for Supermicro H14DST-F
  • 48 GB DDR5 5600 CL46 registered ECC RDIMM
  • 2Rx8 organisation at 1.1 V for full-capacity stability
  • Registered buffer offloads controller across every slot
  • Lifetime replacement warranty with US-based technical support

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does the 48GB DDR5 5600 kit include a heat spreader or any cables, or must they be purchased separately?

The kit contains only the 48GB DDR5 5600 CL46 288-pin ECC RDIMM module; no heat spreader or cables are included, and none are required for installation.

Should I choose this 48GB 2Rx8 CL46 module or a different capacity or rank for the Supermicro H14DST-F?

This 48GB 2Rx8 CL46 RDIMM matches the board's qualified DDR5 5600 specification; other capacities or ranks may not be validated for full-speed operation on this platform.

What does the 5600 MT/s rating mean once the module is installed in a running H14DST-F server?

The module will operate at DDR5 5600 (PC5-44800) with CL46 latency at 1.1 V, delivering the full rated bandwidth the motherboard's memory controller supports.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.