Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 4GB DDR4 2400 PC4-19200 CL17 1Rx6 1.2V 288-Pin UDIMM memory upgrade

SKU CH-ERKV-43R1H

4 GB DDR4 2400 UDIMM module with CL17 timing and 1.2 V operation for Samsung desktop PCs

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 4 GB capacity expands system memory for smoother multitasking
  • DDR4 2400 speed transfers data at up to 19200 MB/s
  • CL17 latency reduces delay between memory requests
  • 2 V operation lowers power draw and heat output
  • 288-pin UDIMM form factor fits standard desktop DIMM slots

Samsung Compatible DDR4 2400 UDIMM

This NEMIX RAM module delivers 4 GB of DDR4 memory at 2400 MT/s with CL17 latency. It uses a 288-pin UDIMM form factor and runs at the standard 1.20 V. The stick is unbuffered, non-ECC and built with Samsung, Micron or Hynix components. It is designed as a direct upgrade for Samsung desktop systems.

Suits Samsung desktops needing a single 4 GB DDR4

This part fits owners of compatible Samsung PCs who want to add one module or replace a failed unit. It will not suit builders who need ECC error correction, registered buffering, higher frequencies such as DDR4 2666, capacities above 4 GB, or a heat spreader for overclocking headroom.

2400 MT/s DDR4 speed and CL17 timing

The module operates at PC4-19200 with CAS latency 17 at 1.20 V. Your motherboard must support DDR4 2400 unbuffered non-ECC UDIMMs; if it requires a different speed, voltage or ECC type this memory will not function correctly.

Pluspunten

  • 4 GB capacity expands system memory for smoother multitasking
  • DDR4 2400 speed transfers data at up to 19200 MB/s
  • CL17 latency reduces delay between memory requests
  • 2 V operation lowers power draw and heat output
  • 288-pin UDIMM form factor fits standard desktop DIMM slots

Specificaties

BrandNEMIX RAM
SeriesSamsung Desktop PC Compatible Series Memory
ModelSamsung DDR4 2666MHZ Non-ECC Unbuffered UDIMM
Part NumberMD19200-416K1
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSamsung
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx6
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR4 2400MHZ PC4-19200 1Rx6 1.2V CL17 288-PIN Non-ECC Unbuffered UDIMM

Vragen over dit artikel

Will the 288-pin DDR4 UDIMM fit my Samsung desktop motherboard?

Yes, the 288-pin DDR4 UDIMM form factor matches standard desktop DIMM slots used in compatible Samsung systems.

Do I need to change any BIOS settings when installing this CL17 2400 MHz module?

Installation is plug-and-play; the module runs at 1.2 V with standard JEDEC timings, so no manual BIOS configuration is required.

Does the lack of a heat spreader affect long-term reliability of this 1Rx6 module?

The module uses major OEM chips rated for continuous operation at 1.2 V without a spreader, so no additional cooling maintenance is needed.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.