SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$ 391,99
0.00503707BTC
Op voorraad
NEMIX RAM
NEMIX RAM 576GB (6 x 96GB) DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM memory upgrade
A 576 GB DDR5 server kit of six 96 GB registered ECC RDIMMs at 6400 MT/s CL52 1.1 V, validated for the Supermicro H13DSH motherboard
- Capacity576GB (6 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 576 GB total capacity from six 96 GB modules for memory-intensive server workloads
- DDR5 6400 speed with CL52 latency delivers rated throughput for the Supermicro H13DSH
- Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
- 1 V operation at 2Rx4 rank matches the motherboard's memory-controller requirements
- 288-pin RDIMM form factor fits the board's DIMM slots and population rules
Server memory kit for Supermicro H13DSH
This 576GB kit contains six 96GB DDR5 6400 RDIMM modules built to the exact rank, voltage and timing the Supermicro H13DSH memory controller expects. It is intended for administrators upgrading that specific motherboard with registered ECC memory.
Capacity and headroom at 576GB
Six 2Rx4 modules deliver 576GB total, allowing the board to run fully populated at DDR5 6400 with CL52 latency. The registered architecture keeps every slot stable at full load, while ECC corrects single-bit errors before they affect production workloads.
Build fit and requirements
The 288-pin RDIMM form factor matches the H13DSH slots; UDIMM or SODIMM modules will not work. Verify the motherboard manual for supported capacities and population order before installation, as server memory rules vary by model.
Pluspunten
- 576 GB total capacity from six 96 GB modules for memory-intensive server workloads
- DDR5 6400 speed with CL52 latency delivers rated throughput for the Supermicro H13DSH
- Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
- 1 V operation at 2Rx4 rank matches the motherboard's memory-controller requirements
- 288-pin RDIMM form factor fits the board's DIMM slots and population rules
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Vragen over dit artikel
Will this 6400 MT/s DDR5 kit run at its rated speed alongside my existing slower DDR5 modules?
This kit is specified for DDR5 6400 (PC5-51200) at CL52 and 1.10V; mixing modules with different speeds or timings will typically force all channels to the slowest common settings.
How can I confirm the 576GB kit is detected and ECC is active after installation?
Check the BIOS memory summary for 576GB total capacity, 6400 MT/s speed, CL52 latency, and ECC enabled; then run a memory diagnostic to verify error-correction function.
Does the package include only the six 96GB RDIMMs or are any extra parts supplied?
The box contains the 576GB (6 x 96GB) DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM kit and nothing else; no heat spreaders, cables, or tools are included.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
US$ 74,99
0.00096362BTC
Op voorraad