Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR5 UDIMM modules without heat spreaders in a 64GB kit

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 5600 ECC UDIMM CL46 1.1V 288-pin Supermicro X14SAZ-TLN4F memory upgrade

SKU CH-M8BQ-7X25A

A 64 GB kit of four 16 GB DDR5 ECC UDIMM modules running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

  • 64 GB kit lets your Supermicro board run at full rated capacity
  • DDR5 5600 speed matches the memory controller for stable operation
  • ECC detects and corrects single-bit errors to prevent data corruption
  • 1 V CL46 1Rx8 timing aligns with the platform's requirements
  • 288-pin UDIMM form factor fits the X14SAZ-TLN4F motherboard exactly

Supermicro X14SAZ-TLN4F DDR5 ECC upgrade

This 64GB kit contains four 16GB DDR5 ECC unbuffered UDIMMs built to the exact specifications of the Supermicro X14SAZ-TLN4F motherboard. It delivers the precise rank, voltage and timing the board's memory controller expects for full-capacity recognition. System builders maintaining data integrity in workstations or entry servers install this kit to eliminate guesswork.

Thermals and power at standard voltage

Modules operate at the JEDEC-standard 1.1V without a heat spreader, drawing minimal power during typical workloads. The low-voltage DDR5 design keeps heat output modest inside densely populated chassis. Silent, passively cooled operation is maintained because no active cooling is required on the DIMMs themselves.

Behaviour under sustained ECC workloads

ECC circuitry detects and corrects single-bit errors continuously during long-running compute or storage tasks. The 1Rx8 organization and CL46 latency remain stable across extended sessions at the rated 5600 MT/s data rate. Builders needing registered DIMMs, SODIMM form factors or non-ECC memory should select a different product line.

Pluspunten

  • 64 GB kit lets your Supermicro board run at full rated capacity
  • DDR5 5600 speed matches the memory controller for stable operation
  • ECC detects and corrects single-bit errors to prevent data corruption
  • 1 V CL46 1Rx8 timing aligns with the platform's requirements
  • 288-pin UDIMM form factor fits the X14SAZ-TLN4F motherboard exactly

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I install the 288-pin DDR5 UDIMMs in the Supermicro X14SAZ-TLN4F, and which step is most often missed?

Power down, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then consult the motherboard manual for the exact DIMM population order required for four 16 GB sticks.

What maintenance or replacement will the 64 GB ECC kit need over time?

No scheduled maintenance is required; the modules have no heat spreader or moving parts, so only a failed stick would need replacement under the lifetime warranty.

What limit appears first when the 5600 MT/s CL46 memory runs under sustained load?

The CAS latency of 46 cycles at 1.1 V is the primary timing constraint; the JEDEC-standard voltage and unbuffered design keep thermal throttling unlikely in normal server airflow.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.