SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$ 391,99
0.00503986BTC
Op voorraad
NEMIX RAM
NEMIX RAM 768GB (6×128GB) DDR5 6400 CL52 1.1V 2Rx4 ECC Registered RDIMM for Supermicro H14DST-FL
A 768GB DDR5 6400 CL52 1.1V ECC Registered RDIMM kit of six 128GB 2Rx4 modules validated for the Supermicro H14DST-FL motherboard
- Capacity768GB (6 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 768 GB total capacity from six 128 GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- 10 V operation matches the server memory controller spec
- Registered ECC RDIMM design prevents silent data corruption
- 288-pin 2Rx4 form factor verified for Supermicro H14DST-FL
Exact-match DDR5 RDIMM kit
This 768 GB kit contains six 128 GB DDR5 6400 registered ECC modules built to the Supermicro H14DST-FL memory controller specification. Each module runs at 1.1 V with CL52 timing and a 2Rx4 rank structure so the board recognises the full capacity at rated speed without manual tuning.
Capacity and headroom
Six populated slots deliver 768 GB of registered memory for multi-socket workloads that scale across every channel. The registered architecture keeps the memory controller stable when all slots are filled, while ECC corrects single-bit errors before they affect production data. Populations beyond the board's validated maximum or mixed-rank configurations are not supported.
Build and daily implications
Modules use major OEM Samsung, Micron or Hynix chips without heat spreaders, relying on server chassis airflow for cooling. The 288-pin RDIMM form factor fits only registered DIMM slots; UDIMM or SODIMM boards will not accept them. Installation must follow the motherboard manual's population order to achieve full capacity and rated 6400 MT/s operation.
Pluspunten
- 768 GB total capacity from six 128 GB modules
- DDR5 6400 speed with CL52 latency for rated performance
- 10 V operation matches the server memory controller spec
- Registered ECC RDIMM design prevents silent data corruption
- 288-pin 2Rx4 form factor verified for Supermicro H14DST-FL
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K6 |
| Capacity | 768GB (6 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 6X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Vragen over dit artikel
Will the 6400 1.1V 2Rx4 RDIMM kit run at rated speed in the remaining slots of my H14DST-FL if I keep the existing 128GB modules?
The kit is spec-matched to the H14DST-FL memory population rules; install it in the approved slot order and the board will recognise the full 768GB capacity at DDR5-6400 CL52.
How can I confirm the 768GB kit is operating at CL52 with ECC active after installation?
Check the BIOS memory information screen — it should report 768GB total, DDR5-6400 speed, CL52 latency and ECC enabled for each of the six 128GB RDIMMs.
Does the MR51200-724K6 package include the six 128GB RDIMMs only, or are any cables or brackets supplied?
The box contains exactly the 768GB 6×128GB DDR5-6400 CL52 1.1V 2Rx4 288-pin ECC Registered RDIMM kit; no cables, brackets or other accessories are included.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
US$ 74,99
0.00096415BTC
Op voorraad