Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Eight green DDR5 RDIMM modules without heat spreaders, 288-pin, 768GB kit

NEMIX RAM

NEMIX RAM 768GB (8 x 96GB) DDR5 6400 PC5-51200 CL52 1.1V 2Rx4 ECC RDIMM memory upgrade

SKU CH-HR5T-8507E

Eight 96 GB DDR5 RDIMM modules deliver 768 GB of registered ECC server memory at 6400 MT/s with CL52 latency and 1.1 V operation

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 768GB 8X96GB

Nog 24 configuraties tonen
  • Massive 768 GB capacity from eight 96 GB modules for memory-intensive server workloads
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth for the GIGABYTE MZ33-CP1
  • Registered ECC design offloads the controller and corrects single-bit errors automatically
  • 1 V operation at 2Rx4 rank matches the motherboard's exact electrical requirements
  • 288-pin RDIMM form factor ensures physical and electrical fit in every populated slot

Server-grade DDR5 ECC RDIMM kit

This 768 GB kit contains eight 96 GB DDR5 6400 registered DIMMs built for the GIGABYTE MZ33-CP1 motherboard. Each module runs at 1.1 V with CL52 latency and a 2Rx4 organisation. The registered buffer and on-die ECC keep data integrity intact when every slot is populated.

Thermals and power in normal use

Operating at the standard 1.1 V DDR5 voltage, the modules draw minimal power per stick even at full capacity. No heat spreaders are fitted, so airflow across the 288-pin PCB handles cooling silently in a properly ventilated server chassis. Registered buffering reduces electrical load on the memory controller during sustained workloads.

Capacity and population rule

The kit delivers 768 GB across eight slots, matching the exact rank, voltage and timing the board expects for full-speed recognition. Buyers who need a different total capacity or a non-registered form factor cannot use this kit. Consult the motherboard manual for approved DIMM population order before installation.

Pluspunten

  • Massive 768 GB capacity from eight 96 GB modules for memory-intensive server workloads
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth for the GIGABYTE MZ33-CP1
  • Registered ECC design offloads the controller and corrects single-bit errors automatically
  • 1 V operation at 2Rx4 rank matches the motherboard's exact electrical requirements
  • 288-pin RDIMM form factor ensures physical and electrical fit in every populated slot

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I install the 288-pin RDIMM modules in the GIGABYTE MZ33-CP1 and which population order should I follow?

Insert each 96GB RDIMM into the eight DDR5 slots following the motherboard manual's exact population sequence; the registered 2Rx4 design requires full seating until the retention clips click, and the board must see all eight modules to enable the 768GB capacity at 6400 MT/s.

Will the Samsung Micron or Hynix chips on these 96GB RDIMMs need firmware updates or thermal-pad replacement over time?

No firmware updates or thermal-pad changes are required; the modules run at 1.10V without a heat spreader and rely on the server's chassis airflow, while ECC corrects single-bit errors automatically throughout the kit's service life.

At what point does the CL52 latency or 1.10V voltage become a bottleneck during sustained 6400 MT/s workloads?

The CL52 timing and 1.10V operating voltage are the JEDEC-rated limits for this DDR5-6400 kit; under continuous full-load the memory controller will throttle before the modules exceed their specified latency or voltage envelope.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.