Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR3 SODIMM modules with gold contacts

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1333MHz PC3-10600 1.35V 204-Pin SODIMM Kit for POSIFLEX XT-4015 JIVA memory upgrade

SKU CH-J6CW-AGTNX

An 8 GB DDR3 SODIMM kit running at 1333 MHz with 1.35 V modules built for the POSIFLEX XT-4015 JIVA terminal

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-4015 JIVA terminal
  • Dual-channel 8GB kit improves multitasking responsiveness
  • DDR3 1333 PC3-10600 matches system specification
  • Low-voltage 1.35V operation reduces power draw
  • Rigorously stress-tested modules ensure reliable uptime

POSIFLEX XT-4015 JIVA memory kit

This 8 GB kit contains two 4 GB DDR3 SODIMM modules built for the POSIFLEX XT-4015 JIVA point-of-sale terminal. It targets system integrators and IT staff who need a direct replacement for the original memory in that specific platform.

204-pin DDR3 SODIMM form factor

The modules use the 204-pin DDR3 SODIMM layout with 1.35 V operation and CL9 latency. Unbuffered non-ECC chips from major OEM suppliers are mounted without heat spreaders, keeping the profile low enough for the tight chassis of the POS terminal.

Upgrades from lower-capacity factory memory

Installing this kit doubles the typical 4 GB factory configuration to 8 GB, giving the terminal more headroom for multi-tasking POS software and peripheral drivers. The jump is worthwhile when the current system shows memory pressure during peak transaction periods.

Pluspunten

  • Designed for POSIFLEX XT-4015 JIVA terminal
  • Dual-channel 8GB kit improves multitasking responsiveness
  • DDR3 1333 PC3-10600 matches system specification
  • Low-voltage 1.35V operation reduces power draw
  • Rigorously stress-tested modules ensure reliable uptime

Specificaties

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Vragen over dit artikel

What speed does the DDR3 1333 PC3-10600 interface actually run at in the POSIFLEX XT-4015 JIVA?

The modules operate at DDR3 1333 MT/s, matching the PC3-10600 rating for the POSIFLEX XT-4015 JIVA terminal.

Will the 204-pin SODIMM sticks fit the memory slots on the POSIFLEX XT-4015 JIVA?

Yes, each 4 GB stick uses the standard 204-pin DDR3 SODIMM form factor required by the POSIFLEX XT-4015 JIVA.

How do I install the two SODIMM modules, and what step is often missed?

Power off the terminal, open the memory cover, insert both modules at an angle until the clips snap shut, then verify the system detects 8 GB in BIOS.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.