Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4-2666 ECC UDIMM CL19 1.2V 1Rx8 288-pin memory upgrade

SKU CH-ZKYJ-CVDGS

8GB DDR4-2666 ECC UDIMM with CL19 latency, 1.2V operation and 1Rx8 rank for ASUS Pro WS C246-ACE workstation motherboards

  • Capacity8GB
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

Size 8GB

  • ECC corrects single-bit errors preventing data corruption
  • Verified fit for ASUS Pro WS C246-ACE motherboard
  • 2666 MHz DDR4 speed with CL19 latency
  • 2 V low-voltage operation reduces power draw
  • 288-pin UDIMM form factor matches board slots

Exact-match DDR4 ECC module

This 8GB DDR4-2666 UDIMM delivers ECC error correction at CL19 and 1.2V for the ASUS Pro WS C246-ACE workstation motherboard. The 1Rx8 unbuffered organisation matches the board's memory controller so the full capacity is recognised at rated speed. Builders needing registered DIMMs or non-ECC memory cannot use this module.

Verified fitment for C246-ACE

The 288-pin unbuffered ECC form factor is the exact type the ASUS Pro WS C246-ACE requires, not an RDIMM or SODIMM. Population order and maximum capacity depend on the motherboard manual, so confirm the supported configuration before installation. Systems that demand registered or load-reduced DIMMs are not supported.

Low-voltage operation without spreaders

Running at 1.20V keeps power draw modest and thermals manageable inside a workstation chassis. No heat spreader is fitted, so airflow across the bare PCB handles cooling silently. Modules needing active cooling or higher voltage rails fall outside this design.

Pluspunten

  • ECC corrects single-bit errors preventing data corruption
  • Verified fit for ASUS Pro WS C246-ACE motherboard
  • 2666 MHz DDR4 speed with CL19 latency
  • 2 V low-voltage operation reduces power draw
  • 288-pin UDIMM form factor matches board slots

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME21300-818K1
Capacity8GB
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASUS
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR4 2666MHz PC4-21300 1Rx8 1.2V 288-PIN ECC UDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the CL19 latency hold steady during extended workloads on the ASUS Pro WS C246-ACE?

Yes, the module runs at its rated DDR4 2666 speed with CL19 timing and 1.20 V, so the memory controller sees the exact latency it expects without downclocking.

Does the lack of a heat spreader cause higher temperatures or fan noise under all-day operation?

The UDIMM operates at standard 1.2 V DDR4 power and is unbuffered, so it stays within normal thermal limits for workstation boards without adding audible fan load.

Must the motherboard already support 288-pin DDR4 ECC unbuffered DIMMs for this kit to work?

Yes, the ASUS Pro WS C246-ACE requires 288-pin DDR4 ECC unbuffered UDIMMs, and this 1Rx8 module matches that exact form factor and voltage.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.