Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 PC4-25600 CL22 288-Pin UDIMM Dell Compatible memory upgrade

SKU CH-S8W1-TXEF1

An 8 GB DDR4 3200 UDIMM with CL22 timing and 1.2 V operation, built for Dell desktop compatibility

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity adds headroom for multitasking
  • DDR4 3200 speed delivers responsive data throughput
  • CL22 latency supports stable system timing
  • 2 V operation keeps power draw low
  • 288-pin UDIMM form factor fits compatible Dell desktops

Dell Compatible 8GB DDR4 3200 UDIMM

This NEMIX RAM module is an 8GB DDR4 3200 PC4-25600 CL22 288-pin UDIMM built for Dell desktops and workstations. It runs at 1.20V with a 1Rx6 unbuffered non-ECC layout using major OEM chips. The part is validated for Dell systems referencing SNPV0M5RC/8G.

Suits Dell owners adding single-slot capacity

Buyers upgrading a compatible Dell desktop or workstation with an open 288-pin slot can install this stick in minutes. Systems that require ECC registered modules or notebook SO-DIMM form factors cannot use this UDIMM. Builders needing speeds beyond 3200 MT/s should look elsewhere.

3200 MT/s DDR4 speed rating

The module operates at DDR4 3200 (PC4-25600) with CL22 latency at 1.20V. This speed grade decides whether the memory matches the platform's supported data rate and timing budget.

Pluspunten

  • 8 GB capacity adds headroom for multitasking
  • DDR4 3200 speed delivers responsive data throughput
  • CL22 latency supports stable system timing
  • 2 V operation keeps power draw low
  • 288-pin UDIMM form factor fits compatible Dell desktops

Specificaties

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-816K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx6
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx6 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

Vragen over dit artikel

Does my Dell desktop need a free 288-pin DDR4 UDIMM slot to install this 8 GB module?

Yes, the module is a 288-pin DDR4 UDIMM and requires an available DDR4 UDIMM slot on the motherboard.

Can I run this CL22 3200 MHz stick alongside slower Dell memory already in the system?

The module will operate at the speed and timings of the slowest installed memory, so mixing with slower Dell DDR4 is supported.

How can I verify the module is running at 3200 MHz with CL22 latency after installation?

Check the memory speed and CAS latency in the BIOS or with a system-information tool such as CPU-Z to confirm 3200 MHz and CL22.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.