BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00278185BTC
Op voorraad
NEMIX RAM
NEMIX RAM 96GB (2×48GB) DDR5 5600 PC5-44800 CL46 2Rx8 1.1V 288-PIN UDIMM SuperMicro C9Z790-CGW memory upgrade
96 GB kit of two 48 GB DDR5 5600 UDIMM modules with CL46 latency and 1.1 V operation for SuperMicro C9Z790-CGW systems
- Capacity96GB (2 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96GB dual-channel kit expands workstation memory headroom for large datasets
- DDR5 5600 speed with CL46 latency accelerates throughput in compute-intensive tasks
- 1V operating voltage reduces power draw while maintaining stability
- 2Rx8 dual-rank architecture increases memory density per slot
- Validated for SuperMicro C9Z790-CGW ensures plug-and-play compatibility
Compatible DDR5 Kit for SuperMicro C9Z790-CGW
This 96 GB DDR5 kit contains two 48 GB unbuffered UDIMMs rated at 5600 MT/s with CL46 latency. It is built for the SuperMicro C9Z790-CGW motherboard and runs at the standard 1.1 V. The modules use major OEM chips and ship without heat spreaders for a low-profile fit.
Suits C9Z790-CGW builds needing maximum UDIMM
Builders populating all four slots on the C9Z790-CGW for 96 GB of non-ECC DDR5 will find this kit validated for that board. Systems requiring registered or ECC memory, or boards limited to lower densities, cannot use these modules.
288-pin DDR5 UDIMM form factor decides fit
The kit uses the 288-pin DDR5 UDIMM interface, which is the only physical and electrical connection the C9Z790-CGW accepts for non-ECC memory. A different pin count or memory generation will not seat or function in this platform.
Pluspunten
- 96GB dual-channel kit expands workstation memory headroom for large datasets
- DDR5 5600 speed with CL46 latency accelerates throughput in compute-intensive tasks
- 1V operating voltage reduces power draw while maintaining stability
- 2Rx8 dual-rank architecture increases memory density per slot
- Validated for SuperMicro C9Z790-CGW ensures plug-and-play compatibility
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 5600MHZ Non-ECC Unbuffered RAM |
| Part Number | MD44800-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 96GB (2X48GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
Vragen over dit artikel
Will the 288-pin DDR5 UDIMM modules fit the four DIMM slots on the SuperMicro C9Z790-CGW motherboard?
Yes, each 48GB stick uses the standard 288-pin DDR5 UDIMM form factor that matches the board's four memory slots.
Is there a specific slot order for installing the 2Rx8 modules on the C9Z790-CGW, and what mistake should I avoid?
Populate the slots designated for Channel A and Channel B first, usually the second and fourth slots from the CPU; the common error is filling only the first and third slots.
How long can I expect the Samsung, Micron or Hynix chips on these 48GB modules to last before needing replacement?
The modules are built with major-brand DRAM and carry a lifetime replacement warranty, so they are rated to run for the useful life of the system.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00280773BTC
Op voorraad
