NEMIX RAM 96GB (2x48GB) DDR5 4800 CL40 1.1V desktop RAM

96GB DDR5 kit for desktop and workstation builds

This 96GB kit contains two 48GB DDR5 UDIMMs rated at 4800 MT/s with CL40 latency. The modules operate at 1.1V and use a standard 288-pin layout for desktop motherboards. They are unbuffered and non-ECC, making them suitable for consumer platforms, workstations and gaming machines that accept DDR5 memory.

DDR5 4800 speed and platform limits

DDR5 4800 is the base JEDEC speed for this generation and runs at 1.1V without overclocking. The memory controller on the CPU and the motherboard firmware determine whether the kit runs at its rated 4800 MT/s or falls back to a lower speed. Some platforms may require a BIOS update to recognise 48GB density modules or to enable the full 96GB capacity across two slots.

Check motherboard memory support before ordering

Verify that your motherboard supports DDR5 UDIMMs and lists 48GB single-rank or dual-rank modules on its qualified vendor list. Confirm the maximum total capacity and the supported speeds for a two-DIMM configuration in the manual. Ensure the board has two free 288-pin DDR5 slots and that the BIOS version installed recognises 96GB kits.