Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

NEMIX RAM

NEMIX RAM 96GB (6x16GB) DDR5 4800 ECC RDIMM CL40 1.1V THINKMATE HDX-QN8-52E4 memory upgrade

SKU CH-ZJWV-9RCSE

A 96 GB DDR5 registered ECC kit of six 16 GB modules running at 4800 MT/s CL40 and 1.1 V for Thinkmate HDX-QN8-52E4 servers

  • Capacity96GB (6 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96 GB total capacity across six 16 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM design for server error correction
  • Low 1.10 V operating voltage reduces power draw
  • CL40 CAS latency tuned for stable throughput

96GB DDR5 ECC RDIMM kit for Thinkmate HDX-QN8-52E4

This 96GB kit provides six 16GB DDR5 4800 registered DIMMs built for the Thinkmate HDX-QN8-52E4 high-density server. Each module carries ECC and registered buffering to protect data integrity under sustained workloads. The 1.10V operating voltage matches the platform specification. System administrators upgrading memory capacity for virtualisation or database tasks will find the configuration validated for this server.

Thermals noise and power draw in normal use

Modules operate at the standard DDR5 1.10V level without heat spreaders, relying on server chassis airflow for cooling. Registered buffering and ECC add minimal latency overhead while maintaining signal stability at 4800 MT/s. Power draw scales with the six-module population; the low voltage helps contain thermal output inside dense enclosures. Acoustic impact is negligible as the DIMMs have no moving parts.

Build fit what it needs and what it frees

The 288-pin RDIMM form factor slots directly into the Thinkmate motherboard DDR5 channels; no adapters or converters are required. Populating all six slots delivers the full 96GB capacity in a single kit, leaving no mismatched modules in the system. Builders needing different capacities or speeds must source separate kits, as this package is fixed at six 16GB CL40 units.

Pluspunten

  • 96 GB total capacity across six 16 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM design for server error correction
  • Low 1.10 V operating voltage reduces power draw
  • CL40 CAS latency tuned for stable throughput

Specificaties

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content96GB (6X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Vragen over dit artikel

How do I install the 288-pin DDR5 RDIMM modules into the Thinkmate HDX-QN8-52E4 server?

Power down the server, open the chassis, locate the DDR5 DIMM slots, align each 288-pin module's notch with the slot key, press firmly until the ejector tabs click locked, then close the chassis and power on to verify all 96GB is detected.

What maintenance or replacement will the ECC registered memory need over its service life?

The modules have no heat spreaders and no moving parts, so no scheduled maintenance is required; if a module fails, the lifetime replacement warranty covers a direct swap of the defective 16GB stick.

What limit appears first when the 1Rx8 DDR5 4800 CL40 kit runs sustained workloads?

The CAS latency of CL40 at 4800 MT/s sets the baseline access latency, and the 1.10V operating voltage combined with the registered buffer defines the thermal and signal-integrity ceiling during continuous operation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.